Artex Removal Quotes

Compare Artex Removal Prices Near You

Home > Artex Removal

Artex Removal

Are you looking to removal artex from your ceiling or walls? Prior to removing artex on your ceiling, it’s always crucial to determine whether or not the surface coating material contains asbestos. Asides from this, you may also wish to know how much you’re going to have the asbestos artex ceiling removed. If yes, then you’ve come to the right place! In order to help you make the best informed decision possible, this post was written to help give you an idea of the price it’s going to cost to remove asbestos artex ceiling.

 

Unfortunately, as simple as it seems, there’s no single straightforward answer to this question as there are many factors that can affect the cost of hiring an asbestos artex removal professional. These factors include the project’s scale, the complexity of the area which needs to be removed as well as the need for extra materials. Generally, professional artex removal companies charge a standard rate for their labour. As a result, you can always predict that the tradesperson’s labour will be more costly based on the extent of the job. Therefore, the more costly the labour fees will be if the job takes longer time to complete.

 

On the average, a tradesperson will charge within the range of £250 to £400 on a daily basis to undertake the project for you. And of course, you can expect these rates to vary based on the company hired as well as the area you live in. For example, you can expect that a tradesperson’s charges would be higher in an area such as Central London, as opposed to other areas which are more rural.

Enter your postcode above to and get quotes from plasterers in your local area who can removal asbestos from your ceiling or walls

Average Artex Removal cost

How much artexing removal might cost depends on how big the area is, how accessible it is and your location. Different plasterers charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artex removal in the UK is about £200.

Average price per Artex Removal job in 2021

Avg. price low

Avg. price low
£114

Avg. price

Avg. price
£327

Avg. price high

Avg. price high
£667

£800

£600

£400

£200

£0

Prices based on actual Artex Removal costs, as reported by local Quotatis members.

Artex Removal installation cost in 2021

Labour cost £140
Material cost £50
Waste removal £10
Time frame: 1-3 days

Advantages for Artex Removal

  • Smooth flat ceiling or walls
  • Professional can removal artexing with asbestos

Disadvantages for Artex Removal

  • Difficult to get flat on your own without a professional
  • Need to check for asbestos

Artex Removal Manufacturers

Artex Removal FAQs

How much does it cost to remove asbestos artex ceiling

Prior to removing artex on your ceiling, it’s always crucial to determine whether or not the surface coating material contains asbestos. Asides from this, you may also wish to know how much you’re going to have the asbestos artex ceiling removed. If yes, then you’ve come to the right place! In order to help you make the best informed decision possible, this post was written to help give you an idea of the price it’s going to cost to remove asbestos artex ceiling in the UK.

 

Unfortunately, as simple as it seems, there’s no single straightforward answer to this question as there are many factors that can affect the cost of hiring an asbestos artex removal professional. These factors include the project’s scale, the complexity of the area which needs to be removed as well as the need for extra materials. Generally, professional artex removal companies charge a standard rate for their labour. As a result, you can always predict that the tradesperson’s labour will be more costly based on the extent of the job. Therefore, the more costly the labour fees will be if the job takes longer time to complete.

 

On the average, a tradesperson will charge within the range of £250 to £400 on a daily basis to undertake the project for you. And of course, you can expect these rates to vary based on the company hired as well as the area you live in. For rxample, you can expect that a tradesperson’s charges would be higher in an area such as Central London, as opposed to other areas which are more rural.

Is artex dangerous

The short and simple answer to this question is, it depends. Artex surface coating was manufactured with white abestos ( until the mid 1980’s ) in order to strengthen as well as harden it. In other words, this implies that all the ceilings and walls coverings made by Artex Ltd and other manufactures at the time are highly likely to contain asbestos. Although Artex Ltd stopped using asbestos as early as the mid 1980’s, there were still other manufacturers who continued using it until 1999 when the laws and regulations covering the use of asbestos changed in the year 2000.

 

Asbestos, however, is only harmful when disturbed and releases its deadly fibres. For instance, when it’s being sanded and removed as it usually poses no risks when left undisturbed. Since it’s not possible to identify Artex containing asbestos fibres with the naked eye, it’s strongly recommended that you hire the services of a qualified person or company to help determine if you have asbestos in your ceilings or walls especially if your house was constructed before the year 2000. The professionals will be able to advise you on the best course of action as well as if it’s dangerous.

 

To be sure if your Artex contains asbestos, you’ll need to have the artex sampled by an asbestos surveyor. If you’re planning to have a construction or maintenance work done on your property, and the artex is likely to be in the way or disturbed, there’s a need for you to have a refurbishment or demolition asbestos survey done. This will ensure that all the areas that’ll be disturbed by the work is properly tested to determine the presence or otherwise of asbestos. If found, the artex will have to be addressed and either removed or protected before any work can take place.

 

What is artex

Artex simply refers to a surface coating that’s commonly incorporated for interior decorating. Although it’s usually found on ceilings but it can also be used on the walls as well. The surface coating enables the professional plasterer or decorator add both texture as well as patterns to it. Originally, the name “Artex is the trademark of a UK based company known as Artex Ltd. Over time, the Artex name has been used to refer to all textured coatings, although there are other businesses that manufacture and sell identical products.

 

You can find Artex on ceilings as well as walls of mainly residential properties. In the 70’s and 80’s, it was pretty much a trend to have either your wall or ceiling ( can be both ) covered with Artex. The surface coating can be incorporated to create raised, textured swirls as well as patterns on ceiling and walls. There are a number of different patterns that can be made using Artex and some of these includes the following: Broken leather, swirl, stipple, fan or shell as well as knifed plaster. It can also provide just a bobbly raised uneven patter appearance from top to bottom.

 

Artex is main put to use by mainly decorators ( mostly plasterers). This is a skilled job as it’s tedious to create uninformed patterns especially if you don’t know how or where to start. Although the skill of Artex is very much a trade that’s dying rapidly now, but it was pretty much in high demand especially in the 70’s and 80’s. Nowadays, homeowners now prefer smooth plastered finishes over Artex, as they can be easily painted or wallpapered.

Can you wallpaper over artex

Although they’re pretty much outdated now, artex happens to be a very popular surface coating option just a few decades ago. Several homeowners with artex in recent times would either want to have them removed or cover them up with stuffs such as a wallpaper. So if you’re wondering whether or not it’s possible to wallpaper over artex, then there you have it. It’s possible to wallpaper over artex, however it’s not advisable as wallpaper may eventually crack over time. On the other hand, the artex can also create ridges beneath the wallpaper which allows unpleasant protrusions in the wallpaper. Instead of applying wallpaper over artex, a more permanent solution would be to cover it with drywall or wet plaster or perhaps just have it removed completely.

 

There are two types of wallpaper, there’s the thin wallpaper application which comes with adhesive on one side as well as a pattern or colour on the other side. With this, all you need do is simply to peel and stick. Then the other type is the sturdier wallpaper that’s more thick and requires a special wallpaper paste. However, it’s important to note that if you choose to wallpaper over your artex, you won’t be able to make use of the thin type of wallpaper, rather you’ll have to incorporate the sturdier  option which makes use of wallpaper paste.

 

The wallpaper paste is the product you mix with water to produce a paste which you’ll have to apply to your walls before applying the applying the regular wallpaper - one without adhesive on one side. Appling wallpaper to an artex decoration may just give you the updated appearance you so much desire.

How to get artex off walls

Artex is a water based decorative surface coating is typically incorporated on both walls and ceilings so as to apply a pattern. During the peak of its popularity in the 1970’s, it was considered the height of fashion when it comes to interior wall designs however its major drawback remains the fact that it usually contains asbestos especially if it was manufactured before the laws governing the use of asbestos was changed in the year 2000. And asbestos, as we know it, can be deadly when disturbed and its fibres are inhaled.

 

If you have artex installed in your purchased property and you do not know when the artex walls were done, or perhaps you just want to change the aesthetic design of your home into something more modern and to your personal taste, then you may want to remove the existing artex from your property for good. If this is your wish then you’ve come to the right place.

 

To remove artex from your walls you can choose to do so using the steaming method or through the use of an external product.

 

Using the steaming method, you should know that it’ll be more labour intensive and time consuming. You need a lot of patience moving your steamer slow and steady because if left on a spot for too long can damage the wall behind the coating. Once the artex has been dampened with the steamer, you can then scrape them off with a handheld scraper.

 

A faster solution would be to use an external product to remove your artex.  For example, you can use X-Tex which is a water-based coating remover. All you need to do is paint the substance over your artex wall and leave to dry for about 30 to 60 minutes before peeling away the artex.

Does artex contain asbestos

The fact is several buildings contain artex as well as other textured coating on walls and ceilings which are all likely to contain asbestos. However, artex itself is not the main threat here but the potentially deadly harmful fibres that’s contained in it. In this post, we’re going to look at whether or not artex truly contains the deadly abestos.

 

The short and simply answer to this question is yes, artex can definitely contain asbestos, however not all artex will contain asbestos. The main reason asbestos was a popular construction material is because it was not only cheap and strong but also because it was very durable and long lasting. It was used in numerous construction materials ( which includes artex ) before it was finally banned in the year 1999. unfortunately during the time when artex was very popular in the 60’s, 70’s as well as 80’s, asbestos was still very much in use during the period. And as a result, a lot of the artex incorporated during that period will contain the deadly asbestos fibres. However, this does not only apply to artex, but also other textured coatings containing asbestos were incorporated in construction until 1999 when asbestos was formerly banned in the UK. These asbestos containing materials are often used on walls as well as ceilings of residential properties.

 

Unfortunately, it’s not possible to know an asbestos containing artex just by looking at it. In order to determine whether or not an artex contains the deadly asbestos fibres, it’ll have to be sampled and tested in a laboratory. What’s more? While several artex contains asbestos, asbestos free artex was available from the 1970s. However, since it’s impossible to determine using the naked eye, all artex installed before the ban will be assumed to contain asbestos.

How to get artex off a ceiling

Artex is a water based surface coating which is used to decorate both ceilings and walls with a textured finish. Back in the 1970’s, artex happens to be very popular when the swirling or spiky effects it creates  were considered to be the best of fashion when it comes to interior designs. However, in today’s world, an artex ceiling is not only considered outdated but also a pain to clean and repair.

 

If you have an artex ceiling in your residential property and looking for a way to get it off, then you’ve come to the right place. In this post, we’re going to show you how its done without much stress.

 

To get started you’d need to get the following tools and material which includes: safety goggles, dust mask and rubber gloves, plastic sheeting, canvas drop cloth ( carpet) or rosin paper (hard floor) and step ladder

 

 

Prepare the room. Start this by moving all furniture out of the room or stack the furniture at the centre of the room and cover using plastic sheets. Once done, cover all non-removable items with plastic sheets and lay down a canvas drop cloth for carpet floors and rosin paper for hard floors

  • Put on your safety gear
  • Use a utility knife or joint knife to slowly chip away at the texture and create a smooth surface.
  • Mix joint compound in a bucket as per the instructions on the package
  • Skim the surface with a thin layer of joint compound to smooth it out using a taping knife, then leave to dry overnight before you proceed
  • Lightly sand the surface smooth with the help of a 220-grit sanding block
  • Use a damp cloth to wipe the surface clean prior to painting.

How to Plaster over Artex and Textured Ceilings

Local Heroes

Based: in Windsor, SL4

Whether it's fixing a shower, tiling a kitchen, wiring a light or unblocking a drain, each tradesper...

Latest review

Peter T., KT1
13th October 2019

Interior work | Plastering in Kingston upon Thames

My job was completed by Dunkley Pastering. Sam went above and beyond in terms of ser...

KP DECORATING HOME IMPROVEMENTS

Based: in London, SM2

Dear Sirs,



Would you like to take advantage of a professional painting and decorating servic...

Latest review

Doris A., SE10
19th August 2017

Interior work | Plastering in London

very messy, did not clean up after work. Left used and wet plaster in the house in a ...

PROPERTY BUILDING GROUP

Based: in Brasted, TN16

PROPERTY BUILDING GROUP is based in Brasted and have 1 positive reviews

Latest review

Anthony C., BR2
12th February 2018

Interior work | Plastering in Bromley, Keston

did not use this company

AJM PRO PLASTERING SERVICES

Based: in Preston, PR2

AJM PRO PLASTERING SERVICES is based in Preston and have 1 positive reviews

Latest review

Shirley M., BL4
28th November 2017

Interior work | Plastering in Bolton

The company were messy when he said he was clean the protection was not put on th flo...

MACCAS PLASTERING & DECORATING

Based: in Holmfirth, , HD9

MACCAS PLASTERING & DECORATING is based in Holmfirth, and have 20 positive reviews

Latest review

Michael E., HX3
12th November 2016

Interior work | Plastering in Halifax

nice guy give a reasonable quote have not decided who to use at present.

C j m builders

Based: in Spalding, PE11

C j m builders is based in Spalding and have 1 positive reviews

Latest review

Plaxcidea C., PE2
12th August 2017

Interior work | Plastering in Peterborough

Friendly and helpful

VMS ELECTRICAL NORTH WEST

Based: in Cheshire , SK7

VMS Electrical is a leading and trusted Commercial and Domestic electrical contractor

Latest review

K., M33
3rd March 2017

Interior work | Plastering in Sale

Room plastered, thank you

Rated Local plasterers

WEATHERSHIELD ROOFING & BUILDING CONTRACTORS

54 review(s)
Based: in Wickford, SS12 9LA

WEATHERSHIELD ROOFING & BUILDING CONTRACTORS based in Wickford, offer services in Plastering & Ceilings. They have an average rating of 4.4164814814815 from 54 review(s). See their latest 4 star review below

BLUE SKY DEVELOPERS LIMITED

1 review(s)
Based: in London, NW3 6DX

Blue Sky Developers is a registered company in the UK that specialises in all building services you could require. We are based in North London but carry work out all around London.

NPW PLASTERING AND DECORATING

1 review(s)
Based: in Norwich, NR11 7BX

We offer plastering and decorating services at competitive prices We are fully qualified and insured No job to big or small Friendly professional service

STAG LODGE HOMES LTD

2 review(s)
Based: in Richmond, DL10 6LQ

STAG LODGE HOMES LTD based in Richmond, offer services in Plastering & Ceilings. They have an average rating of 4.875 from 2 review(s). See their latest 5 star review below

Willmac Contract Services Ltd

6 review(s)
Based: in Blantyre, G72 0SH

Willmac Contract Services Ltd based in Blantyre, offer services in Plastering & Ceilings. They have an average rating of 4.6666666666667 from 6 review(s). See their latest 5 star review below

D R S General Builder

13 review(s)
Based: in Watford, WD18 6SF

D R S General Builder based in Watford, offer services in Plastering & Ceilings. They have an average rating of 4.6730769230769 from 13 review(s). See their latest 5 star review below

MJS Roofing and Building Services

4 review(s)
Based: in London, SE10 9TX

Hello my services I offer to you are coming from 16 year experience. We go that extra bit further to keep all our customers happy. All our work comes with guaranteed thanks.

HENLEY FLAT ROOFING AND CHIMNEYS LTD

2 review(s)
Based: in Henley on thames, RG9 1AT

Proudly Serving Customers in Henley-on-Thames and Surrounding Areas in a 50-Mile Radius is a leading professional roofing company based in Henley on Thames. We are an established name with over 40 years of experience in the trade. Henley Roofing a...

ANDREA PLASTERING

1 review(s)
Based: in Luton, LU2 9BU

I am a professional plasterer with over 15 years of experience in all aspects of plastering work. Skimming, float and set, rendering,pebble dash, plasterboarding the walls and ceilings,removing chimneys and load bearing walls,tiling,painting and de...

MAKING HOMES BETTER LTD

4 review(s)
Based: in London, N12 0DR

We are a family run business specialising in home improvements including fascias, soffits and guttering. We only use our own workers so we can guarantee the high standard of our workmanship. We pride ourselves on fantastic customer s...

Similar Customer Enquiries for Artex Removal

31 Jul

Interior work | Plastering

Durham - DH6

Enquiry from: Nicole P

Start Date: Immediate

plaster coving fitted in lounge hall stairs and landing i have 160 feet or 53 meters are you the property owner: owner of the property how many rooms are you looking to have plastered: 2 rooms are you...

Post a similar request >

31 Jul

Interior work | Plastering

London - SE27

Enquiry from: Adam T

Start Date: Immediate

mr requested quotes for plastering from a plasterer around london. they are considering a couple of projects at the moment.call anytime to arrange appointment to discuss. the information below is what...

Post a similar request >

31 Jul

Interior work | Plastering

Aberdeen - AB25

Enquiry from: Marina D

Start Date: Immediate

need to remove the artex from ceilings

Post a similar request >

30 Jul

Interior work | Plastering

Bridgnorth - WV15

Enquiry from: JAMES L

Start Date: Immediate

i was wondering of you could give me an approximate guide price or even a quotation for a lath and plaster ceiling 15m2. are you the property owner: owner of the property property type: terrace how m...

Post a similar request >

30 Jul

Interior work | Plastering

Liverpool - L6

Enquiry from: Carole C

Start Date: Immediate

Artex Removal Lead

small plastering job where ring doorbell has ben wire up. the hole the electrician made, are you the property owner: tenant (with permission) property type: semi detached how many rooms are you lookin...

Post a similar request >

29 Jul

Interior work | Plastering

Wishaw - ML2

Enquiry from: Fay M

Start Date: Immediate

ms requested quotes for plastering from a plasterer around wishaw. they are considering a couple of projects at the moment.call anytime to arrange appointment to discuss. the information below is what...

Post a similar request >

29 Jul

Interior work | Plastering

Coventry - CV2

Enquiry from: Andrew W

Start Date: Immediate

coving for one large bedroom kitchen hallway and living room. are you the property owner: owner of the property property type: detached how many rooms are you looking to have plastered: 5+ rooms are y...

Post a similar request >

29 Jul

Interior work | Plastering

Wellingborough - NN29

Enquiry from: David B

Start Date: Immediate

bathroom 2 metres square. cover existing ceiling artex, simple pattern. are you the property owner: owner of the property property type: terrace are you looking for interior decorating: yes how many ...

Post a similar request >

29 Jul

Interior work | Plastering

Coventry Southern Satellite Villages & Kenilworth - CV8

Enquiry from: Mike B

Start Date: Immediate

to fit large ogee plaster coving (supplied)..in living room..5.5 metres by 4.5 metres….. property type: detached how many rooms are you looking to have plastered: 1 room are you looking for interior...

Post a similar request >

29 Jul

Interior work | Plastering

Bromsgrove - B61

Enquiry from: Christopher S

Start Date: Immediate

victorian plaster cornice instillation in two upstairs bedrooms are you the property owner: owner of the property property type: terrace how many rooms are you looking to have plastered: 2 rooms are y...

Post a similar request >

27 Jul

Interior work | Plastering

Tavistock - PL19

Enquiry from: Gareth H

Start Date: Immediate

to dot and dab walls plasterboard ceilings and then skim roughly ***m are you the property owner: owner of the property property type: detached how many rooms are you looking to have plastered: 5+ ro...

Post a similar request >

27 Jul

Interior work | Plastering

Glasgow - G20

Enquiry from: David K

Start Date: Immediate

fit coving in living room and kitchen property type: semi detached are you the property owner: owner of the property are you looking for interior decorating: no how many rooms are you looking to have ...

Post a similar request >

27 Jul

Interior work | Plastering

Surbiton - KT6

Enquiry from: Anne-Marie H

Start Date: Immediate

plaster has blown in small downstairs cloakroom. ceiling and walls , down to tiling halfway up walls, require skimming. are you the property owner: relative of owner property type: detached how man...

Post a similar request >

27 Jul

Interior work | Plastering

Lincoln - LN1

Enquiry from: Steve G

Start Date: Immediate

new coving and ceiling rose installation. single room 4m x 4m plus some making good to cracked existing are you the property owner: owner of the property property type: semi detached how many rooms ...

Post a similar request >

26 Jul

Interior work | Plastering

Newbury - RG14

Enquiry from: Jonathan M

Start Date: Immediate

fix coving in lounge 20’ x 13’ approx room is completely empty and awaiting coving fitter property type: detached are you the property owner: owner of the property are you looking for interior dec...

Post a similar request >

26 Jul

Interior work | Plastering

Ellesmere Port - CH66

Enquiry from: Christine G

Start Date: Less than one month

customer in the ellesmere port area made an enquiry a couple of projects including plastering.call anytime and arrange an appointment to discuss. below is some details about this project: are you the ...

Post a similar request >

26 Jul

Interior work | Plastering

Dover - CT16

Enquiry from: Rich B

Start Date: Immediate

hi, we performed a wall knock through and the existing cornice was damaged in a couple of locations. around 1.5m altogether. the lower half of the cornice needs repairing. is this achievable, it’s q...

Post a similar request >

26 Jul

Interior work | Plastering

Bedworth - CV12

Enquiry from: Richard L

Start Date: Immediate

one side of the coving in our lounge has fallen off and cannot be refitted as it was damaged when it fell onto the television. we would also like the rest of the coving checking as it appears to be c...

Post a similar request >

26 Jul

Interior work | Plastering

Newton Abbot - TQ12

Enquiry from: JOHN H

Start Date: Immediate

hi not sure if this is something that you'd be interested in but we need some artex removed from a living room and kitchen ceiling (2 rooms) hopefully speak soon :) cheers john are you the property ow...

Post a similar request >

26 Jul

Interior work | Plastering

Leominster - HR6

Enquiry from: Heather S

Start Date: Immediate

coving in living room and kitchen are you the property owner: owner of the property property type: detached how many rooms are you looking to have plastered: 2 rooms are you looking for interior decor...

Post a similar request >

How it works

Tell us about your Artex Removal project

Answer a few quick questions so we can match you with professionals who can help.

Find up to 4 Plasterers near you

Get free, no-obligation quotes from 4 verified Plasterers working in your area.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Need more help?

What’s the Difference Between Plastering and Skimming? Published: 12/07/2017 You’ve probably heard people saying that they want their walls plastering. However, have you heard the less common term that they require skimming? We’re going to bust the misconceptions about the difference between these 2 terms. Plastering Contrary to popular belief, plastering is the term offered to the whole trade. This means that skimming is […] Read this article
3 Tips to Help You Maintain Your Plaster Published: 01/03/2017 If plasterboard is installed properly, it can last for a long time. But even top quality plaster walls will get damaged or wear out over time. You can increase how long your plasterboard lasts by taking steps to maintain it. Looking after your plaster walls can be easy and doesn’t require any specialist skills. Read […] Read this article
8 Things you Should Ask your Plasterer Published: 24/11/2016 What should you ask your plasterer to ensure that they’re an expert in their field? The plastering trade is a complicated one, so it’s always best to get a qualified professional to do plastering for you. Here are 8 things that you should ask your plasterer. If they’re good enough, they should be able to […] Read this article