Damp Proofing in Barnet
Extensions such as garage conversions will usually require supplementary damp proofing to be added through the conversion, as the existing garage will typically have a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing should be added to walls and floors. Moreover, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by utilising a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this may need to be improved as part of the conversion to be able to adhere to current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting gradually as moisture sets in. This is accomplished by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to adhere to, therefore is it important to make sure that your garage conversion incorporates appropriate damp proofing methods.