Block Paving in Argyll

Find Block Paving Prices in Argyll

Home > Paving & Driveways Projects > Block paving > Argyll

Block Paving in Argyll

Block paving can look good as a driveway. It is an elegant and functional solution to your driveway and will give your home great kerb appeal. Whether you want a classic herringbone design or something a little different, there are plenty of block paving options and materials accessible to you. The bricks used in block paving are most commonly manufactured from clay, but some are made of different composite materials. One of the main benefits to block paving is that if a few of the bricks get damaged over time, they can easily be replaced. It also means that it's easier to perform work under the surface of the paving without leaving a mark. The most frequent pattern that driveway companies lay is the herringbone pattern because it has the strongest interlock, rendering it a great choice for driveways. The herringbone pattern is created by the tradesperson by setting the blocks at 45 degrees or 90 degrees to the perpendicular. Both types of herringbone design create an elegant and appealing look for your driveway that will make your home look fantastic to potential owners. Fill out our online form to speak to up to 4 driveway companies who can provide you with a quote for a block-paved driveway.

Average Block paving cost in Argyll

The typical cost for a block paving project is about £4,000. For smaller areas of paving, or if you live in a cheaper area of the country, expect to pay approximately £3,000, but for larger areas or within the London area, costs may be as much as £4,600-£5,000.

Average price per Block paving job in 2024

Avg. price low

Avg. price low
£3,000

Avg. price

Avg. price
£4,000

Avg. price high

Avg. price high
£4,600

£4700

£3525

£2350

£1175

£0

Prices based on actual Block paving costs for Argyll, as reported by local Quotatis members.

Block paving installation cost in Argyll 2024

Labour cost £2,800
Material cost £1,000
Waste removal £200
Time frame: 1-2 days

Block paving searches in March 2024

Block paving Projects in Argyll in February 2024

960

Requests for quotations in Argyll in February 2024

0

Requests for Block paving quotations in Argyll in February 2024. 0% change from January 2024.

0

Requests for Block paving quotations in Scotland in February 2024. 0% change from January 2024.

Source: Numbers calculated based on the search volumes in major search engines

Block paving searches in cities and towns near Argyll February 2024

Argyll

Argyll is a region in western Scotland, adjoining the areas of Inverness-shire, Perthshire, Ayrshire and Bute. The region includes the areas of Kintyre, Oban, The Mull of Kintyre along with the islands away from the mainland. The region can be quite desirable for people thinking of purchasing another household because of the great landscapes and far better standard of living. Regardless of your home, ensure only to use respectable firms in Argyll to find the best quality of work for your home enhancements.

Looking for Block paving in Argyll?

Get free quotes from local driveway installers

Get free quotes

Block paving pros in Argyll

Barton Brothers

47 review(s)
Based: in Lanark, ML11 8NP

Choose Barton Bros. & Sons who cover Lanarkshire and all of Central Scotland for all your landscaping and hard landscaping services including tarmac and block paving driveway installations. We have over 30 years of experience and are always deliver e...

Latest review

Kevin W., EH47
18th December 2021
5

Paving & Driveway | Block in Salvesen Crescent

awaiting job to be done

Similar Customer Enquiries for Block paving in Argyll

01 May

Paving & Driveway | Block

Dunoon - PA23

Enquiry from: Dan W

Start Date: Immediate

customer in the dunoon area made an enquiry a couple of projects including tarmac paving & driveway.call anytime and arrange an appointment to discuss. below is some details about this project: are yo...

Post a similar request >

10 Apr

Paving & Driveway | Block

Dunoon - PA23

Enquiry from: Ewan G

Start Date: Immediate

installation of cobble block bit drianagr leveled off edgiing bit hard core put down are you the property owner: owner of the property property type: semi detached do you require: block paving locati...

Post a similar request >

08 Sep

Paving & Driveway | Block

Inveraray - PA32

Enquiry from: Ruth T

Start Date: Immediate

greenhouse base on gravel, greenhouse is 8 x 14 so base must be 10 x 16, ideally are you the property owner: owner of the property property type: detached location: rear do you require: block paving w...

Post a similar request >

15 Oct

Paving & Driveway | Block

Ballachulish - PH49

Enquiry from: George F

Start Date: Immediate

The sub-base has already been laid, I need the cement sand base and mono block paving laid. Are you the property owner: Relative of Owner Property Type: Detached Do you require: Block Paving Location...

Post a similar request >

30 Jul

Paving & Driveway | Block

Oban - PA34

Enquiry from: Alan R

Start Date: Immediate

Driveway paved

Post a similar request >

02 Nov

Paving & Driveway | Block

Dunoon - PA23

Enquiry from: Matt Y

Start Date: Immediate

I require a quote for mono block drive ( approx 140 sq Mtr

Post a similar request >

22 Jul

Paving & Driveway | Block

Dunoon - PA23

Enquiry from: Kenneth B

Start Date: Immediate

Tarmac over an existing car park area 5.5m x 8m (44sqm). currently stone chip in tar.

Post a similar request >

How it works

Tell us about your Block paving project

Answer a few quick questions so we can match you with professionals who can help.

Find up to 4 Driveway Installers in Argyll

Get free, no-obligation quotes from 4 verified Driveway Installers working in Argyll.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

FAQs

how to lay block paving?

How To Lay Block Paving

Do you wish to know how to install block paving? We’ve got you covered! Here, you’ll find a useful step by step guide that’ll provide you with all the necessary information to lay a wide range of block paving products available in the market today. You must, however, note that the installation of block paving can be a tricky affair and should not be attempted unless you have undergone a proper training or have a good experience in the field. If otherwise, we’d advise you to leave the task for a reliable block laying professional to guarantee the best results and also avoid making costly mistakes.

lDesign

• Draw up a design to perfectly suits your needs.

• Decide on the type of block as well as colour.

lExcavation

• Use a mini excavator or a JCB ( depending on the size of the job) to excavate the driveway.

• Identify and mark out the area to be excavated.

• Dug out the area until you reach a suitable level

• Ensure that the proposed finish level is 150mm underneath the damp proof course in any of the adjoining building’s brick.

lEdge Restraints

• Build a 100mm depth-thick concrete foundation with the help of a concrete mixer, 1 part cement and 6 parts ballast.

• Position the kerb unit on top of the level with a string line and spirit level.

• Use a trowel and rubber mallet to mortar the kerb unit to the foundation.

• Haunch the back of the kerb units in such a way that the concrete reach half way up the kerb’s rear.

lSubbase

• Put the crushed concrete in the edge restraints and ensure it’s at the desired level of 50mm.

• Use a vibrating plate to compact and level

lScreeding

• Apply a layer of sharp sand (to 50mm depth) and campact it using a vibrating plate.

• Apply second layer of sharp sand (to 20mm depth) on top of the first layer.

• Level the second layer to the correct falls.

lInstallation Of Paving

• Lay the block paving starting from the bottom of a slope.

• Ensure the blocks are placed at about 10mm to 15mm above the required finish level.

• Make sure the blocks used are between 3-5 packs as you proceed with your desired pattern. You may need to cut smaller block pieces to fill smaller gaps.

lFinishing Touches

• Clear out the area to ensure no debris is left on the blocks.

• Put kiln dried sand and brush across the whole of the area, ensuring the sands falls between the blocks’ joints.

• Compact the drive with the vibrating plate.

• Brush more kiln dried sand over the area and compact again

• Repeat the process until the joints are full of sand.

what sand for block paving?

Have you decided to install block paving and wondering what the best sand to be applied to the joints is in order to achieve a perfect job? Well, you’re at the right place! This is one of the most frequently asked questions when it comes to block paving and we seek to give you a reliable solution once and for all.

The best sand for block paving is a kiln-dried sand. It’s an extremely fine sand which has been dried in a kiln to get rid of all the water before it’s incorporated to achieve the best results. Therefore, the sand contains no moisture and is commonly used to fill the joints of block paving to keep the paving’s structure rigid and strong. It also goes a long way to prevent the ingress of water while stopping the paving from moving and becoming loose. The major reason why the paving sand must be dried is to allow it flow easily into the joints as well as the block paving’s gaps. As result of this smooth flowing to the bottom of the joints, there will be no sand sticking to the sides of the pavers.

Another major reason why kiln-dried sand is commonly applied to the block paving’s joints is to prevent water from penetrating the paved area. It also tightens the individual pavers together to prevent from moving and becoming loose. In the event whereby you happen to leave the joints of your block paving without kiln dried sand, it’s highly likely that they’ll sink as a result of water penetration and the blocks will become very loose. After washing block paving, it’s very important to also replace any sand washed off in the process once the paving is dried to prevent water ingress into the joints.

how to seal block paving?

Are you having weed problems on your carefully picked out block pavings? After spending huge bucks to install the block pavings, the last thing any homeowner would want to discover is weed taking over the prized asset. Fortunately, this is a problem that can be effectively handled in a few simple steps provided in this article.

Basically, sealing of block paving is all about prevention of weed growth in the area by total weed removal, putting of sand between the block paving joints and sealing with a good quality sealant. This is a task that’s best left for a reliable professional to guarantee the best results especially if you lack proper training and experience. This guide will give a good insight into the process.

Here are the equipment you’ll need to get started: pressure washer, weed killer, bin bag, broom, small brush, protective gear, sealing roller, spueegee, jointing sand and sealer and DIY sprayer.

lRemove The Weed

• Put on a protective clothing and gloves

• Get a weed disposal bag to clean while you go.

• Apply the selected weed killer on both areas where weeds are present and the absent ones to prevent any growing.

lPressure Washing

• Angle your pressure washer between the gaps. This is done to remove all weeds and debris that are still lying around as well as removing all possible chemical residues to create a thorough clean between the paving slab.

• Leave the washed area to dry.

l Sand The Joints

• Check the weather forecast to ensure there’s about 24 to 48 hours of dryness as its important for both sand and sealant to do a perfect job.

• Put sand between the gaps and push it down with your small brush until its levelled.

lSeal The Gaps

• The sealing process should be done immediately and sanding.

• Clean up the patio

• Perform a test using a small area

• Apply the sealant

• Apply the second of sealant

• Leave to dry for about 2 to 3 hours.

how to lay block paving on a slope?

Are you worried there’s a slope on the area where your block paving is to be installed? Good news is, it’s very possible to lay block paving on a slope. However, this can be a very difficult task which should be done by a reliable professional ( especially if you lack proper training and experience) who can guarantee the best results, the first time and also help save you money from possible costly mistakes. This guide will provide you with everything you need about the slope block paving installation process. Let’s have a look!

• Demarcate The Walkway

To get started, you have to determine how and where you want your walkway to be while also determining the thickness of the paver. Ensure to choose the less sloppy area and utilize landscape paint to mark the area visibly.

• Prepare The Ground

Clear out all forms of dirts, roots, rocks and other debris on the soil. Once done, proceed to cutting the sods to the required length and put them somewhere close.

• Make Boundaries

There’s a need for landscape borders. Here, it’ll be easier to use plastics as boundaries for your lawn’s edges. Install them on the sides that have already been cut

• Apply A Level Of Gravel

Obtain the correct size of gravel and spread them evenly over the area to ensure a firm foundation for the pavers is formed. Makes sure that the rocks is at a minimum of 2 inches deep into the soil.

• Install The Block Pavers

Start from the centremost position of the pathway and work towards the sides until you’re able to cover every inch of the area.

• Apply A Layer Of Cement

Apply cement over the pavers and utilize a broom to sweep it and fill up all the gaps and spaces between the pavers. Then, press the pathway to be levelled using a compactor.

Placholder Image

Other Top Projects in Argyll

Need more help?

6 Tips to Help You Prepare your Driveway for Winter Published: 25/10/2020 Winter can be hard on your driveway. Cold temperatures can make many surfacing materials brittle and snow and ice can create and enlarge cracks and holes. But there are plenty of things you can do to avoid these problems. Try these 6 tips to prepare your driveway for winter. 1. Keep it clean and free […] Read this article
How to Work out Which Driveway Surface Material is For You Published: 30/05/2019 Installing a new driveway on your property is a brilliant way to make it easier to use and boost the appearance of your home. But with so many driveway surface materials to choose from, it can be hard to know which one to go for. Some of the most popular driveway surface materials are gravel, […] Read this article
Your Guide to Lighting Your Driveway this Winter Published: 26/01/2018 Lighting your driveway can be a great move. Installing lights on the edges of your driveway can help you get around it in the dark and avoid driving over flower beds or into steps. Winter is the obvious time to think about driveway lighting, as it’s when we get the least amount of daylight. But […] Read this article

Are you a driveway installer in Argyll?

We can help you get more Block paving work and boost your business.

Join today