Block Paving in Orkney Islands

Discover Block Paving Prices in Orkney Islands

Home > Paving & Driveways Projects > Block paving > Orkney Islands

Block Paving in Orkney Islands

Block paving can look good as a driveway. It is a stylish and functional solution to your driveway and can give your home great kerb appeal. Whether you want a classic herringbone design or something a little different, there are plenty of block paving materials and possibilities available to you. The bricks found in block paving are made of clay commonly, but some are made up of different composite materials. Among the main advantages to block paving is that if a few of the bricks get broken over time, they can simply be replaced. In addition, it means that it is easier to perform work under the surface of the paving without leaving a mark. The most common pattern that driveway companies lay is the herringbone pattern since it has the strongest interlock, rendering it a fantastic choice for driveways. The tradesperson creates the herringbone pattern by placing the blocks at 45 degrees or 90 degrees to the perpendicular. Both types of herringbone pattern create a stylish and appealing look for your driveway that will make your home look fantastic to buyers. Fill out our online form to get in touch with up to 4 driveway companies who can give you a quote for a block-paved driveway.

Average Block paving cost in Orkney Islands

The typical cost for a block paving project is about £4,000. For smaller areas of paving, or if you live in a cheaper area of the country, expect to pay approximately £3,000, but for larger areas or within the London area, costs may be as much as £4,600-£5,000.

Average price per Block paving job in 2024

Avg. price low

Avg. price low
£3,000

Avg. price

Avg. price
£4,000

Avg. price high

Avg. price high
£4,600

£4700

£3525

£2350

£1175

£0

Prices based on actual Block paving costs for Orkney Islands, as reported by local Quotatis members.

Block paving installation cost in Orkney Islands 2024

Labour cost £2,800
Material cost £1,000
Waste removal £200
Time frame: 1-2 days

Block paving searches in March 2024

Block paving Projects in Orkney Islands in February 2024

313

Requests for quotations in Orkney Islands in February 2024

0

Requests for Block paving quotations in Orkney Islands in February 2024. 0% change from January 2024.

0

Requests for Block paving quotations in Scotland in February 2024. 0% change from January 2024.

Source: Numbers calculated based on the search volumes in major search engines

Block paving searches in cities and towns near Orkney Islands February 2024

Orkney Islands

Orkney is located of the north east coastline of Scotland, containing close to 70 islands to provide a combined populace of approximately 20,000. Its greatest island, Mainland, is the 6th major Scottish isle and 10th greatest in Britain. The Orkney Islands have a low population density of only twenty people every square km. If you want work finished in your house, don't forget to work with trustworthy tradespeople and check quotations for the best price.

Looking for Block paving in Orkney Islands?

Get free quotes from local driveway installers

Get free quotes

How it works

Tell us about your Block paving project

Answer a few quick questions so we can match you with professionals who can help.

Find up to 4 Driveway Installers in Orkney Islands

Get free, no-obligation quotes from 4 verified Driveway Installers working in Orkney Islands.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

FAQs

how to lay block paving?

How To Lay Block Paving

Do you wish to know how to install block paving? We’ve got you covered! Here, you’ll find a useful step by step guide that’ll provide you with all the necessary information to lay a wide range of block paving products available in the market today. You must, however, note that the installation of block paving can be a tricky affair and should not be attempted unless you have undergone a proper training or have a good experience in the field. If otherwise, we’d advise you to leave the task for a reliable block laying professional to guarantee the best results and also avoid making costly mistakes.

lDesign

• Draw up a design to perfectly suits your needs.

• Decide on the type of block as well as colour.

lExcavation

• Use a mini excavator or a JCB ( depending on the size of the job) to excavate the driveway.

• Identify and mark out the area to be excavated.

• Dug out the area until you reach a suitable level

• Ensure that the proposed finish level is 150mm underneath the damp proof course in any of the adjoining building’s brick.

lEdge Restraints

• Build a 100mm depth-thick concrete foundation with the help of a concrete mixer, 1 part cement and 6 parts ballast.

• Position the kerb unit on top of the level with a string line and spirit level.

• Use a trowel and rubber mallet to mortar the kerb unit to the foundation.

• Haunch the back of the kerb units in such a way that the concrete reach half way up the kerb’s rear.

lSubbase

• Put the crushed concrete in the edge restraints and ensure it’s at the desired level of 50mm.

• Use a vibrating plate to compact and level

lScreeding

• Apply a layer of sharp sand (to 50mm depth) and campact it using a vibrating plate.

• Apply second layer of sharp sand (to 20mm depth) on top of the first layer.

• Level the second layer to the correct falls.

lInstallation Of Paving

• Lay the block paving starting from the bottom of a slope.

• Ensure the blocks are placed at about 10mm to 15mm above the required finish level.

• Make sure the blocks used are between 3-5 packs as you proceed with your desired pattern. You may need to cut smaller block pieces to fill smaller gaps.

lFinishing Touches

• Clear out the area to ensure no debris is left on the blocks.

• Put kiln dried sand and brush across the whole of the area, ensuring the sands falls between the blocks’ joints.

• Compact the drive with the vibrating plate.

• Brush more kiln dried sand over the area and compact again

• Repeat the process until the joints are full of sand.

can you lay block paving on top of concrete?

Can You Lay Block Paving On Top Of Concrete?

The replacement or improvement of your driveway is unarguably one of the most expensive projects you can undertake in the exterior of your home. When done by a true professional the results can be impressive and visually appealing, however you’d have to pay huge bucks to have this done. This is exactly the situation with block paving as it is not only time consuming, but also a lot more expensive when compared to other types of driveway.

A large chuck of this cost is associated with the removal of the existing driveway. So assuming your old driveway is concrete, can you simply pave over the existing concrete? If yes, will it save you money? The simple and short answer is yes. It’s in fact advisable to pave over concrete as this will not only add around 20% to your home’s value, but also make it look a lot more attractive and pleasing to the eye.

However, there are some problems associated with block paving over concrete. It may be better to remove the concrete in situations whereby the base is substandard. For instance, if the ground underneath the concrete is failing, there’ll most definitely be problems.

Also, there’ll be some issues with settling (not even the cracks). If your concrete is dropping little amounts every year, these can affect the blocks and ultimately lead to dropping of some sections of the block paving in such a way that they’ll no longer be on the same level as the other blocks. Giving a rise to the possibility of drainage issues, tripping hazard and lots more.

Other issues that may crop up can be triggered as a result of using the wrong size block height as well as totally ignoring or overlooking the undulations of the concrete.

how much is block paving?

So have you decided to lay block paving on your property? If yes, then knowing how much it would cost would help you prepare a budget and set out a plan before commencement of the project. The cost of block paving depends on a wide range of factors such as the the size of the area in question, cost of labour as well as the type of brick and block paving to be used. So how much does block paving cost? In this article, we’ll give you an general idea of the cost of laying of block paving on a driveway so you can estimate your cost according to your personal requirements and needs.

For a small to medium sized driveway featuring a complex design, the block pavings’ cost starts from a range between £3,000 to £4,000, meanwhile that of a large sized pathway will jump to a range between £6,500 to £7,500. And depending on the complexity of the design, the final cost of the project can be greatly impacted as it would also take a longer period of time to be completed. For the same small to medium sized pathway featuring a simple design which usually takes up to 3 to 4 days will cost within a range of £4,500 to £5,500. While a complex design such as a herringbone pattern will take up to 5 to 6 days and costing within a range of £5,000 to £6,000.

Furthermore, there are also other factors that can determine the price of block paving and another example is the current condition. This includes the preparation work to be carried out before laying the block paving can be a time consuming task especially when the driveway is in a terrible condition and this comes with a high labour cost. Another factor to be considered is the materials used in making the block paving such as stone, concrete, cement, composite and resin - they’re all available in various range of colours and textures. They play a key role in the block paving cost.

What materials can I use to surface my driveway?

The most commonly used driveway surfacing materials are gravel, asphalt, concrete and paving - which can be block, slabbed or patten imprinted. Take a look at our product information pages to help you decide which one to use and which one will look best for your driveway.

Placholder Image

Other Top Projects in Orkney Islands

Need more help?

6 Tips to Help You Prepare your Driveway for Winter Published: 25/10/2020 Winter can be hard on your driveway. Cold temperatures can make many surfacing materials brittle and snow and ice can create and enlarge cracks and holes. But there are plenty of things you can do to avoid these problems. Try these 6 tips to prepare your driveway for winter. 1. Keep it clean and free […] Read this article
How to Work out Which Driveway Surface Material is For You Published: 30/05/2019 Installing a new driveway on your property is a brilliant way to make it easier to use and boost the appearance of your home. But with so many driveway surface materials to choose from, it can be hard to know which one to go for. Some of the most popular driveway surface materials are gravel, […] Read this article
Your Guide to Lighting Your Driveway this Winter Published: 26/01/2018 Lighting your driveway can be a great move. Installing lights on the edges of your driveway can help you get around it in the dark and avoid driving over flower beds or into steps. Winter is the obvious time to think about driveway lighting, as it’s when we get the least amount of daylight. But […] Read this article

Are you a driveway installer in Orkney Islands?

We can help you get more Block paving work and boost your business.

Join today