Gas works

Find & Compare Gas Safe Registered Engineers Near You

Home > Gas works

Average Gas works cost

Average price per Gas works job in 2021

Avg. price low

Avg. price low
£60

Avg. price

Avg. price
£80

Avg. price high

Avg. price high
£92

£200

£150

£100

£50

£0

Gas works installation cost in 2021

Labour cost £56
Material cost £20
Waste removal £4

Advantages for Gas works

  • Completed quickly, ensuring less distruption
  • Can reposition appliances to ensure they are where you want them
  • Gas Safe Registered for your families safety

Disadvantages for Gas works

  • Cost of installatio be be higher compared to the cost of the appliance

Gas works Manufacturers

Gas works FAQs

How to install a gas cooktop in an island

How To Install A Gas Cooktop In An Island

Are you thinking about installing a gas cooktop in your kitchen island? If yes, then you must know that there are clearance requirements that must be met (before you proceed) between the cut out and the countertop’s edge. Basically, there are incremental requirements for island installation due to the fact that it does not make an assumption that the product is going to be fitted against a rear wall that acts to protect the back of the unit. As a result, while doing an island install we must put the safety of the product into consideration much more that we do a standard install. What’s more? This island clearance requirement develops from a third-party agency and is a standard with all brands. So how do you install a gas cooktop in an island having the aforementioned requirements in mind?

• Use a foil tape to line the inside edges of the cut out. The function of this is to prevent heat damage as well as countertop’s discolouration. Put the cooktop top on a secured surface.

• Identify the pipe coming out of the cooktop’s side or bottom and brush onto the threads of the manifold entrance.

• Pass the pressure regulator onto the entrance of the manifold and make use of a wrench to tighten it.

• Brush the pipe joint compound onto one of the flare union adaptor’s threads and pass it into the regulator’s open end. Make it slightly tight with a full turn of the wrench.

• Connect the flare union adaptor’s open end with the flexible appliance connector hose, upon brushing on pipe joint compound.

• Put foam tape on the cooktop underside’s edges, if your cooktop comes with a glass burner plate.

• Turn the cooktop to set it into the cutout.

• Apply pipe-joint compound onto the flare union adaptor left and secure it firmly into the gas shutout valve.

• Connect the flexible hose connector’s free end with the flare union adaptor.

How much is landlord gas certificate

How Much Is A Landlord Gas Certificate?

Do you know as a landlord in the UK, not only does the law requires you to conduct an annual check on all your gas appliances and chimney, but you’d also have to pay for it? Hence, giving birth to the commonly asked question, how much is a landlord gas certificate? With so many variances in CP12 certificate prices everywhere, it can be so confusing knowing the actual one you’re expected to pay. Just by surfing the internet alone you’d come across loads of ads claiming they can help you with a cheap gas safety certificate only to discover that reverse is the case when you reach out to them. Here, you’ll get to know the real amount you’re expected to pay for the annual checks on your gas appliances and chimney.

First and foremost, let’s look at what a Gas Safety Certificate really is. This is a certificate that’s given out to landlords and property management companies after a check has been carried out on all their gas appliances and chimney. This statutory check is expected to be done every 12 months to ensure the safety of all those who make ue of your rental property. Homeowners living in ther property are not required by the law to conduct annual gas safety check, but it’s highly recommended that you get in touch with a Gas Safety engineer to ensure the safety of both you and your loved ones.

As a landlord in the UK, to get all your gas appliances and chimney inspected by an approved Gas Safety engineer and obtain your Gas Safety Certificate, you’re expected to pay within a range of £55 to £65. However, you should note that this cost will increase depending on the number of gas appliances you have (about 30% increase for each additional gas appliance).

What is a gas safety certificate

What Is A Gas Safety Certificate?

Do you wish to know what a Gas Safety Certificate is and if you need to get one?

If you’re in the UK and you own a rental property, you have a statutory obligation to obtain a Gas Safety Certificate. The law ( Gas Safety - Installation and Use, Regulations 1998) stipulates that landlords as a matter of necessity should have all their gas appliances, fittings,and property flues subjected to yearly checks in order to ensure that they’re are totally safe.

The Gas Safety Certificate can be referred to in a number of ways which includes Landlord Gas Safety Record ( LGSR) or CORGI PROFORMA 12 (CP12). The later dating back to when the official body for gas safety in the UK was CORGI. However, the official body is now known as Gas Safe, hence it’s now usually called a Gas Safety Certificate or something along that line. But regardless of whatever you choose to call it, as long as you reside in the UK, it’s crucial to know that if you need one as soon as possible. So how do know if you need a Gas Safety Certificate?

If you’re a homeowner with a property that you live in, you’re not required by the law to obtain a Gas Safety Certificate. There’s nothing like a homeowner’s gas safety certificate, however we’d recommend you subject all you gas appliances and pipework to yearly examinations to ensure they’re functioning properly and safely.

If you’re a landlord in the UK, you’re required by the law to get a Gas Safety Certificate to ensure your property is safe for your tenants. You must reach out to an approved Gas Safe engineer who’ll carry out annual checks on your appliances to ensure that they’re totally safe.

How much is a gas safety certificate

How Much Is A Gas Safety Certificate?

If you’re a landlord in the UK, then you’d know a gas safety certificate is a legal requirement. If yes, then you’d probably like to know how much it’ll cost to get a gas safety certificate so you can make plans on obtaining one for your property. In this article, you’ll find all you need to know about the amount you’re expected to pay for a gas safety certificate in the UK.

First and foremost, let’s look into the use of the certificate. Basically, a gas safety certificate is the legal inspection of your property’s gas appliances which would be done on an annual basis. Only an approved Gas Safe engineer is allowed to carry out this statutory check. Ultimately, if you own rental properties in the country, this is a requirement you can’t afford to overlook to ensure the safety of your tenants.

Furthermore, included in this inspection are each and every gas appliances, chimneys, pipework as well as flues in the property. In recent times, several individuals make use of fewer gas appliances which ultimately implies that they may only need the servicing of their gas fire. Once you’ve passed the inspection, you’ll be given your CP12 certificate which must be kept for a minimum of two years. A copy should also be provided to your tenants within 28 days of issue. So how much will it cost to get a gas safety certificate?

Depending on your location in the UK as well as the number of gas appliances incorporated, the average cost of a gas certificate will range between £60 to £90. The Gas Safe engineer will carry out the task as a fixed and statutory job.

How to get a gas fireplace installed

How To Get A Gas Fireplace Installed

A gas fireplace is one of the most popular means of adding warmth to homes which so many homeowners have now come to terms with, especially with natural gas prices being fairly low for an extended period of time. Properly installed gas fireplaces are not only capable of adding a much needed ambiance and warmth to your home, but also significantly more efficient than the traditional wood-burning fireplaces which mostly produces less heat from the large amount of drafts they consume. Meanwhile a good gas powered fireplace with a properly functioning blower, is very close to being as efficient as a furnace when warming up a room. What’s more? Gas fireplaces also possess a great visual appeal and are also very practical especially when they feature realistic ceramic logs as well as good gas burners.

Installing a gas fireplace by yourself is definitely up there as one of the most advanced DIY tasks you can attempt to try. If you lack proper training and experience, it’s advisable you leave the task to a reliable professional that’ll guarantee the best results while also ensuring costly errors are avoided. This guide will, however, put you in the right direction.

• Construct wall recess to accept the fireplace.

• Punch a hole through the exterior wall of the house to fit in stovepipe thimble.

• Fix a small part of the stovepipe to the exhaust port in the fireplace’s rear.

• Use construction adhesives on the wall around the fireplace opening’s sides and top.

• Apply granite slabs into the adhesive around the opening of the fireplace.

• Put the fireplace in position and ensure the stovepipe goes outdoors through the thimble.

• Use a termination hood to seal the exhaust pipe’s exterior.

• Employ the services of a professional plumber to connect the gas to the fireplace.

• Fit the removable front

• Test the functionality of the fireplace.

How much does it cost to move a gas meter

How Much Does It Cost To Move A Gas Meter?

When your gas meter is not in the right location while completing your renovation works or extending your property, it can be a worrying experience.

As a homeowner, you’re not allowed by the law to move your gas meter by yourself - it’s a very dangerous task that’s too risky to undertake just by watching a Youtube video or reading a blog post. Moving of a gas meter can and should only be carried out by a qualified and licensed gas supplier. And this, ultimately, gives rise to the question - how much does it cost to move a gas meter? Before we provide an answer for that, let’s look at what moving of a gas meter entails.

First and foremost, moving of a gas meter typically involves switching off the gas source to your home or property. The pipeline about 2 metres away from your property would be cut into for safety reasons and diverted into another position. Furthermore, you can as well apply that your meter should be re-fitted and re-linked to the inner copper pipeline, but that’s if the inner copper pipeline happens to be within two metres of the new location of your gas meter.

The time involved in the completion of a gas meter re-location project depends largely on the complexity of the job as each project is unique. Typically, the standard timescale from preparation to the final stage of moving a gas meter will take between 4 to 8 weeks. Finally, how much will it cost to relocate your gas meter?

As there are no government funds to subsidize gas meter relocation costs, this can be a very expensive work to carry out. Generally, the price to move a gas meter of about 5m will start within the range of £640 to £670.

How long does a gas safety certificate last

How Long Does A Gas Safety Certificate Last?

As a result of faulty installation and irregular maintenance of gas appliances and chimneys, a lot of people have been met with an untimely death caused by the toxic gas - carbon monoxide. This is a gas that’s completely odourless, colourless and tasteless - meaning you can’t identify one of its in the environment. But what you should know is, if you stay in an environment filled with carbon monoxide, you’d probably be dead within a couple of hours. Consequently as a landlord, you must do what’s best to ensure the safety of all your tenants by making sure that all your gas appliances and chimneys are subjected to annual check by an approved Gas Safe engineer as required by the law.

Wondering how long a Gas Safety Check will take? The safety of your gas is guaranteed by carrying out regular examinations. Whether or not you possess a gas alarm, it’s still vital to conduct regular gas safe checks to make sure your home is safe. A typical gas safe check would last between 30 to 60 minutes for a normal domestic property. However, in the situations whereby a need for repair arises, it may take longer time to complete. Other factors that can also affect the timing includes includes both the size and location of your property.

So how long does a gas safety certificate last? The simple answer to this question is 12 months. If you own a rental property in the UK, it’s up to you to ensure all your gas appliances and chimney is check after every 12 months to obtain a Gas Safety Certificate which you should hand out a copy to all tenants living in your property. However, if you don’t own the property, you can inform your landlord to get one as soon as possible while also providing a carbon monoxide alarm.

How to install a gas cooker

How Much To Install A Gas Cooker?

Gas cooker is gradually becoming more and more popular in the UK, with several homeowners looking to have one installed in their various homes. Whether you’re planning remodelling, conversions or perhaps you own a new building, gas ( be it a natural gas or Liquid Petroleum Gas - LPG) is now the favourite mode of cooking ,heating as well as warming across the country.

The fact that it’s popular, however, is not an excuse to install a gas cooker by all means in order to reduce the cost. When it comes to gas cooker installation, adequate care must be taken to ensure costly errors which can lead to fire outbreaks and other dangers are avoided. Therefore, if you’re thinking about getting a gas cooker installed in your home, hiring a qualified gas cooker installation company would be your best bet.

Prior to the installation of your gas cooker, the gas plumber will confirm whether or not your home is connected to the mains gas supply. In the absence of a connection, you’ll have to request for a new service connection. Immediately the connection is available, the certified gas cooker installation company can then proceed to fit in the appliance.

However, for a free standing gas cooker, the measurement of the gas cooker’s dimension will be taken by the fitter as well as the available space for the installation in order to determine whether or not the gas cooker will fit in. After this, the next step would be to turn the gas cooker on its side and fit in the underpins. The gas pipe will then be connected to the manifold while also activating the gas and checking for possible leakages. Once done, the gas would be plugged into the outlet and a test will be conducted on the gas to ensure it’s running the way it should.

Rated Local s

Similar Customer Enquiries for Gas works

15 Apr

Gas | Appliances / work

Burton-on-Trent - DE13

Enquiry from: Mark S

Start Date: Immediate

leek test and pressure test property type: semi detached what energy supply do you have: gas what product does this enquiry relate to: other what level of service do you require: repair time scale: i...

Post a similar request >

13 Apr

Gas | Appliances / work

Cinderford, Newnham, Westbury-on-Severn - GL14

Enquiry from: James B

Start Date: Immediate

Gas cooker installed by gas safe engineer

Post a similar request >

01 Apr

Gas | Appliances / work

Manchester - M15

Enquiry from: Nathan B

Start Date: Immediate

gas safety check and service of boiler

Post a similar request >

26 Mar

Gas | Appliances / work

Stoke-on-Trent - ST3

Enquiry from: Patrick C

Start Date: Immediate

Gas certificate for my house

Post a similar request >

17 Mar

Gas | Appliances / work

Hinckley - LE10

Enquiry from: Damian R

Start Date: Immediate

Need a Business Gas Safety Certificate

Post a similar request >

15 Mar

Gas | Appliances / work

Manchester - M22

Enquiry from: Danny C

Start Date: Immediate

boiler service boiler safety certificate for landlord job is in warrington are you the property owner: owner of the property property type: terrace what energy supply do you have: gas what product do...

Post a similar request >

10 Mar

Gas | Appliances / work

Fort Augustus - PH32

Enquiry from: George F

Start Date: Immediate

catering trailer. gas safety inspection and gas urn installation. are you the property owner: owner of the property property type: commercial what energy supply do you have: gas what product does this...

Post a similar request >

06 Mar

Gas | Appliances / work

Shetland - ZE2

Enquiry from: Jenny B

Start Date: Immediate

a new gashob/electric oven stove installed in kitchen. are you the property owner: owner of the property property type: semi detached what energy supply do you have: electric what product does this e...

Post a similar request >

04 Mar

Gas | Appliances / work

Nottingham - NG2

Enquiry from: Stephen G

Start Date: Immediate

Two floating shelves and to re-do a coat hook strip. *** attempt won't hold the coats. plus,change fuse in overhead cooker fan.

Post a similar request >

03 Mar

Gas | Appliances / work

Cardiff - CF14

Enquiry from: Robert E

Start Date: 1 to 3 months

gas service and landlord safety certificate are you the property owner: owner of the property property type: semi detached what energy supply do you have: gas what product does this enquiry relate to:...

Post a similar request >

02 Mar

Gas | Appliances / work

Biggleswade - SG18

Enquiry from: Chantelle L

Start Date: Immediate

i need my new gas cooker connected are you the property owner: owner of the property property type: terrace what energy supply do you have: gas what product does this enquiry relate to: cooker what le...

Post a similar request >

28 Feb

Gas | Appliances / work

Prudhoe - NE42

Enquiry from: JOY P

Start Date: Immediate

check boiler asand appliances for gas safety certificate

Post a similar request >

26 Feb

Gas | Appliances / work

Torpoint - PL11

Enquiry from: Amy W

Start Date: Immediate

a gas fire installation replacing an existing gas fire are you the property owner: owner of the property property type: terrace

Post a similar request >

24 Feb

Gas | Appliances / work

Caterham, Whyteleafe - CR3

Enquiry from: Anne C

Start Date: Immediate

Customer made an online enquiry for Gas Works via one of our websites. Confirmed via . Please call to arrange an appointment to quote.

Post a similar request >

18 Feb

Gas | Appliances / work

Highbridge - TA9

Enquiry from: Sandra B

Start Date: 1 to 3 months

my gas cooker is not burning right ....it looks liked theres only flame on 1 side instead of two (in the oven) are you the property owner: tenant (with permission) property type: semi detached what en...

Post a similar request >

16 Feb

Gas | Appliances / work

Luton - LU4

Enquiry from: Laxshika V

Start Date: Immediate

looking for new boiler and installation are you the property owner: owner of the property property type: semi detached what energy supply do you have: gas what product does this enquiry relate to: oth...

Post a similar request >

11 Feb

Gas | Appliances / work

Cardigan - SA43

Enquiry from: Mary J

Start Date: Immediate

my gas fire isn't coming on as usual, and sometimes it goes off. it could be time for a service too. are you the property owner: owner of the property property type: detached what energy supply do yo...

Post a similar request >

09 Feb

Gas | Appliances / work

Folkestone - CT20

Enquiry from: Howard M

Start Date: Immediate

i’m selling my flat and need a gas safety certificate are you the property owner: owner of the property what work do you require: repair what work do you require: repair, service what work do you re...

Post a similar request >

08 Feb

Gas | Appliances / work

Nottingham - NG2

Enquiry from: Little P

Start Date: 3+ months

Gas works Lead

address: old school hall windmill lane nottingham, nottinghamshire *** phone: *** website: https://nottingham.littleplumsdaynursery.co.uk description: children’s day nursery in nottingham, providing...

Post a similar request >

29 Jan

Gas | Appliances / work

Macclesfield - SK11

Enquiry from: Jude J

Start Date: Immediate

Gas safety certificate required

Post a similar request >

How it works

Tell us about your Gas works project

Answer a few quick questions so we can match you with professionals who can help.

Find up to 4 Pros near you

Get free, no-obligation quotes from 4 verified professionals working in your area.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Boiler Repair Cost Guide Published: 26/03/2020 It always happens at the worst time. You’ll be fast approaching Christmas, or you’ve had a month of heavy bills, and suddenly your heating has stopped working. Or perhaps you try running a bath and there’s next to no hot water, no matter how much you try. Chances are, your boiler has something wrong with […] Read this article
Ideal Boiler Cost Guide Published: 25/03/2020 Keeping your home warm and cosy can be a complicated process if you don’t know how to find and get what you need. Apart from the type of boiler, you have to think about what your property can use, what changes the installation needs and how you can afford it all. There are clear answers […] Read this article
5 Best Combi Boilers Published: 21/02/2020 So what is the best Combi Boiler in ? Keeping your home warm is no joke. If you choose the wrong boiler, it could lead to extra expenses fixing or even replacing it entirely. You want a heating system you can rely on – one that will last you a long time with minimal headache. […] Read this article