Heating | Smart Thermostats
London - E8
Enquiry from: John B
Start Date: Immediate
annual service for unvented boiler are you the property owner: owner of the property age of boiler: 6-10 years how many bedrooms do you have: 1-2 bedrooms
The typical cost of Heating control system is £300. Costs differ based upon the materials and the tradesman selected. The upper price range can be as high as £345. The material costs are normally about £75
Avg. price low | Avg. price low |
---|---|
Avg. price | Avg. price |
Avg. price high | Avg. price high |
£500
£375
£250
£125
£0
Labour cost | £210 | |
Material cost | £75 | |
Waste removal | £15 |
Requests for quotations in Hackney in July 2022
Requests for Heating control system quotations in Hackney in July 2022. 0% change from June 2022.
Requests for Heating control system quotations in London County in July 2022. -32% change from June 2022.
Requests for quotations in London in July 2022
The London Borough of Hackney is a north east London Borough within Inner London in the UK. Southern and eastern parts of the borough are popularly, but unofficially, regarded as being part of east London, with northern and western locations considered to belong to north London. The London Plan, issued by the Greater London Authority, assigns entire boroughs to sub-regions for statutory monitoring, engagement and resource allocation purposes. The most recent 2011 iteration of this plan assigns Hackney to the 'East' sub-region, even though the 2008 and 2004 versions assigned the borough to 'North' and 'East' sub-regions respectively.
Hackney is bounded by Islington to the west, Haringey to the north, Waltham Forest towards the north-east, Newham to the east, Tower Hamlets to the south-east and also the City of London to the south-west. It covers a total area of 7.36 square miles. Based on population estimates from 2014, the borough features a permanent population of about 263150 inhabitants. A lot of Hackney retains an inner-city character, but in such locations as Dalston big housing estates have been joined by newly created gated communities. In South Hackney, close to Victoria Park, terraced Georgian, Victorian and Edwardian housing still survives.
To the north of the borough are Upper Clapton and Lower Clapton, Stamford Hill and Stoke Newington. Light industries within the area surrounding the River Lea employ more than 3000 personnel. Some of the area was used for the 2012 Summer Olympics.
London - E8
Enquiry from: John B
Start Date: Immediate
annual service for unvented boiler are you the property owner: owner of the property age of boiler: 6-10 years how many bedrooms do you have: 1-2 bedrooms
London - E5
Enquiry from: Sam K
Start Date: Immediate
broken gen 3 thermostat, won't charge properly or connect to heatlink. continual h72/w5 error. don't know if it can be partly replaced or repaired - is only 16 months old. are you the property owner: ...
London - E8
Enquiry from: Robin S
Start Date: Immediate
we have an underfloor heating system and use Danfoss thermostats to control the system. One of them has broken and so I have bought a new one which needs to be set up and installed, also because it br...
London - N1
Enquiry from: Emerald R
Start Date: Immediate
Water heater replacement Time scale: Immediate Please call to appoint
London - E8
Enquiry from: Mavis O
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 50 years + Other Forms: 373, 59 Ag...
London - N16
Enquiry from: Momodou S
Start Date: Immediate
Are you the property owner: Relative of Owner New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 50 years + Other Forms: None
London - E8
Enquiry from: Brenda P
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 25-50 years Other Forms: None
London - E8
Enquiry from: Michael A
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 25-50 years Other Forms: None
London - N1
Enquiry from: De V
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 0-5 years Interested in Heating Control System: Yes How old is your property: 25-50 years Other Forms: None
London - E9
Enquiry from: Leo S
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 50 years + Other Forms: None
London - E5
Enquiry from: Andrew D
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 50 years + Other Forms: None
London - N1
Enquiry from: Andy J
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 6-10 years Interested in Heating Control System: Yes How old is your property: 50 years + Call To Appoint
London - E8
Enquiry from: Marian S
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 25-50 years Please contact to ...
London - N1
Enquiry from: Vivien B
Start Date: Immediate
Are you the property owner: Owner of the property Current Boiler Type: Gas Age of boiler: 6-10 years Interested in Heating Control System: Yes How old is your property: 50 years +
London - E5
Enquiry from: Isabel V
Start Date: Immediate
Are you the property owner: Relative of Owner Current Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 50 years + Please contact to a...
Answer a few quick questions so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Heating Engineers working in Hackney.
Compare customer reviews, services and prices, and choose the right professional for you.
Installing your Nest thermostat may not be as easy as screwing a light bulb, but we can also assure you that it isn’t very difficult either. However, if you lack the needed training or experience to pull it off, we’d recommend you hire the services of a professional in order to save yourself some time and money. This guide will give you some quick and easy steps to follow and ensure you make no errors during the installation process.
Once installed removing the Nest Thermostat can be done. To get started, you’ll need just a Philips head screwdriver which Nest has thoughtfully provided with the device.
• Turn off the Nest Thermostat by switching the circuit breaker to the off position.
• Label or mark your old thermostat’s wires. However, if you notice your thermostat is tagged 120v or 240v, or possesses thick wires, do not connect the wires to the Nest as you have a high voltage system.
• Uninstall the old thermostat by locating detaching the wires coming out from the wall into the thermostat. Once done, simply unscrew the device from the wall
• Mark the spot of your thermostat. Do this by threading wires through the Nest base plate’s centre incorporate the tiny bubble level. Once done, you can then use a pencil to mark te two screw holes.
• Attach the trim plate. If you wish to cover the screw holes, simply install the trim plate in the Nest box’s bottom to the base plate.
• Using the screws and screwdriver, attach the Nest base to the wall.
• Connect the wires to the Nest by putting the labelled wires in the Nest’s corresponding ports.
• Put the Nest display by lining up the connector on the display’s back.
• Turn on the power by switching the circuit breaker to the on position
• Connect your Nest thermostat to the WiFi network.
• Follow the on-screen guide and set the temperature.
• Use your smartphone or tablet to download the Nest thermostat’s mobile app to monitor and control your device remotely.
Smart controls such as Hive are the next generation technology with more and more people now converting their houses into smart homes to control multiple devices in the homes remotely. Smart technology can be incorporated with several household devices such as security, lighting, entertainment and more. But what if there’s an oil boiler installed in your home, can you still connect your Hive with the your heating? Well, simply read on to find out.
The answer to this question is yes, most oil boilers are compatible with Hive and can substitute for either an existing conventional programmer or thermostat. The smart technology works to help derive more benefits from your heating system and they usually come with apps which can be used to control your home’s heating from anywhere with just your mobile device. Hive, however, cannot work to replace the functions of smart oil boiler heating controls to modulate your heating as they only work on an on or off basis. To make use of the modulating technology in an oil boiler, the cost of manufacture would be considerably higher while offering little advantage in efficiency for the home or property owner. Ultimately, this implies that you can’t incorporate smart technology to control the output in a similar way as a gas boiler, but there are still some ways to utilize smart technology with your oil boiler in such a way to boost your efficiency and lessen the energy bills.
Do you want to use your Hive with your home’s oil boiler? We’d advise you get in touch with an OFTEC qualified engineer if you wish to install Hive Active Heating on your oil boiler, as British Gas engineer do not offer this service.
The simple answer to this question is yes. The Google Nest thermostats are built in such way that makes it compatible with most 24V systems including the older systems. The device is functional with all common types of fuel such as electricity,natural gas as well as oil. However, before purchase it is vital to determine if your thermostat is also compatible. What’s more? The Nest thermostats is also designed to be usable even without the existence of a C wire (common wire) in your home, although a new C wire installation may be required.
Furthermore, Nest Learning Thermostat is compatible with multiple central heating system such as combi boiler systems, air source and ground source heat pumps (heating only) as well as heat only boiler. Now let’s take a look at the Nest thermostat compatibility!
• The majority of the 24 V systems ( including older systems) are compatible with Google Nest thermostat. They can be incorporated with each and every common types of fuel such as oil, natural gas as well as electricity.
• Prior to the installation of Google Nest thermostat, you can make use of the Google Home or Nest app for proper guidance and to notify you if your system is compatible. It will also give you a bespoke thermostat wiring guide.
• To check the compatibility of your system, you can also check with the Google’s online compatibility checker before purchase.
The Hive thermostat stand is relatively easy to install, however if you lack the necessary training or experience, this is a task you might want to leave to a professional to guarantee the best result while also saving you money and time. This guide will give you a good insight into the Hive thermostat installation process.
The installation of a Hive thermostat does require it to be connected to your home boiler. For this reason we always recommend you get a professional to install it. However once install the Hive Smart Thermostat is very easy to operate and move the controller around your home. To get started, you can follow these steps:
• Press the lever at the lower side of the thermostat and pull away from the front to detach the back plate of your device.
• Once done, simply hang the thermostat on the stand back plate and ensure it holds firmly in place
When it comes to Hive thermostat installation, you might also want to consider the positioning of the device in such a way to heat your home even more efficiently as its designed to be very sensitive to temperature. To identify the best spot for your Hive thermostat, let’s take a look at some of the dos and don’ts.
A Few Dos:
• Do maintain the position of your Hive Thermostat to keep a stable connection with the receive and Hive Hub.
• Do ensure that the position chosen is the centre of your home or a frequently used room.
• Do place the thermostat about 1 to 1.5 metres from floor.
• Do ensure that your thermostat is in a close proximity with the hub and receiver for a better functionality.
A Few Don’ts:
• Don’t place your Hive thermostat stand close to radiators, direct sunlight or other heat sources,
• Don’t position your device near or at places that can expoerience a sudden change in temperature such as the front or back door.
• Don’t leave your thermostat too close to curtains or ornaments.
We can help you get more Heating control system work and boost your business.
Join today