Shower or Bath Fitting in Buckhurst Hill

Discover Shower or Bath Fitting Prices in Buckhurst Hill

Home > Bathrooms Projects > Shower or Bath Fitting > Buckhurst Hill

Shower or Bath Fitting in Buckhurst Hill

Are you searching for Shower or Bath Fitting in Buckhurst Hill? Our network of fitters can aid with your project. All of our Plumber in Buckhurst Hill are checked so you can see local consumer reviews, when the business was started, ratings, approval and also price,  enabling you to make the appropriate decision on who to employ. Let us take the headache out of locating as much as 4 professionals for your Shower or Bath Fitting task.

 

When it concerns the shower room it will not constantly be essential to have a complete redesign. Finishing a restroom refit can be pricey and you'll lack the water supply up until the installment has been ended up.

 

By replacing particular shower room devices such as the commode or shower, you'll offer the room a refresh without the cost connected with a total refit. Yet remember, for all installments in the washroom you'll call for the solutions of a trustworthy plumbing professional. After all, you're linking to the primary water pipes and also one wrong step can see the location flooded.

 

Also suitable a new toilet can be a inconvenience as well as relying on the style, the drain could require to be relocated too. Guarantee to make use of a vetted professional as well as delight in the advantages of a brand-new installation.

We will supply approximately 4 Shower or Bath Fitting pros locally, that will certainly offer quotes for the work you desire done. You'll obtain a property visit from professionals in Buckhurst Hill who'll aid you to choose the right Shower or Bath Fitting for your residence before carrying out the installment. Enter your postcode to start browsing now.

Average Shower or Bath Fitting cost in Buckhurst Hill

The regular cost of fitting a shower of bath is £350. Costs vary based upon the materials and the business chosen. The upper price range can be as high as £402. The material costs are typically about £87.

Average price per Shower or Bath Fitting job in 2024

Avg. price low

Avg. price low
£222

Avg. price

Avg. price
£315

Avg. price high

Avg. price high
£392

£500

£375

£250

£125

£0

Prices based on actual Shower or Bath Fitting costs for Buckhurst Hill, as reported by local Quotatis members.

Shower or Bath Fitting installation cost in Buckhurst Hill 2024

Labour cost £245
Material cost £88
Waste removal £18
Time frame: 1-3 days

Basin, shower, bath, bidet, toilet fit only searches in March 2024

Shower or Bath Fitting Projects in Buckhurst Hill in February 2024

280

Requests for quotations in Buckhurst Hill in February 2024

0

Requests for Shower or Bath Fitting quotations in Buckhurst Hill in February 2024. 0% change from January 2024.

0

Requests for Shower or Bath Fitting quotations in Essex in February 2024. 0% change from January 2024.

Source: Numbers calculated based on the search volumes in major search engines

Basin, shower, bath, bidet, toilet fit only searches in cities and towns near Buckhurst Hill February 2024

Buckhurst Hill

Buckhurst Hill is a well off suburban town in Essex . Situated adjacent to Greater London's northern border, it is part of the Greater London Urban Area. It is at the western edge of Essex, around 10 miles (17 kilometres) northeast of Charing Cross and nearby to the border with the London Borough of Redbridge. Parts of Epping Forest are in Buckhurst Hill and are mixed with residential areas. The nearest places are Chigwell, Chingford, Loughton and Woodford. Based on the 2011 Census, the town has a permanent resident population of roughly 11,380 people. The very first mention of Buckhurst Hill is in 1135, when reference was made to 'La Bocherste', becoming in later years 'Bucket Hill', originally meaning a hill covered with beech trees. It sat in Epping Forest and included only a few scattered houses along the ancient road from Woodford to Loughton. Ahead of the building of the railways, Buckhurst Hill was on the stage coach route between London and Cambridge, Norwich, Bury St Edmunds and Dunmow. Initially it was a part of the parish of Chigwell; there was no road connecting the two communities and to be able to get to church, parishioners had to cross the River Roding at Woodford. The establishment of Buckhurst Hill Station in 1856 led to a rapid expansion in the population of the area, with almost 600 new homes being built close to the station by 1871. The town also hosts the Buckhurst Hill Football Club and Buckhurst Hill Cricket Club. For all of your property improvements, make sure that you employ reputable pros in Buckhurst Hill to make sure you get a fantastic quality service .

Looking for Shower or Bath Fitting in Buckhurst Hill?

Get free quotes from local plumbers

Get free quotes

Shower or Bath Fitting pros in Buckhurst Hill

Jdhare Services LTD

1 review(s)
Based: in Romford, RM6 5QT

Latest review

Jay W., IG8
5

Bathroom | Basin, Bath, or Toilet Fit Only in Woodford Green

Perfect

Similar Customer Enquiries for Shower or Bath Fitting in Buckhurst Hill

06 Oct

Bathroom | Basin, Bath, or Toilet Fit Only

Buckhurst Hill - IG9

Enquiry from: Anjita S

Start Date: Immediate

new mobile shower - currently fixed

Post a similar request >

08 Mar

Bathroom | Basin, Bath, or Toilet Fit Only

Stanmore - HA7

Enquiry from: Sinnathamby S

Start Date: Immediate

New Bath tab and fix the leak . Water going to.the kitchen ceiling when we have a bath. Thus is an insurance work . Some one need to come and take a pictures and send an email to me with the report an...

Post a similar request >

03 Jan

Bathroom | Basin, Bath, or Toilet Fit Only

London - W14

Enquiry from: Paolo S

Start Date: Immediate

Shower or Bath Fitting Lead Shower or Bath Fitting Lead

hi. i need to replace the shower tray and door with *** line of tiles. i'll provide the door, the tray and tiles. there will be the finishing around the door to be done, providing the material such as...

Post a similar request >

25 Oct

Bathroom | Basin, Bath, or Toilet Fit Only

London - NW10

Enquiry from: Dwayne R

Start Date: Immediate

I have a broken bathroom sink/basin and have purchased a replacement sink/basin and pedestal and taps. I'm looking for a quote for fitting and disposal of the old broken sink/basin and taps.

Post a similar request >

31 May

Bathroom | Basin, Bath, or Toilet Fit Only

Stanmore - HA7

Enquiry from: Farah H

Start Date: Immediate

change bath, shower and sink.

Post a similar request >

25 Jun

Bathroom | Basin, Bath, or Toilet Fit Only

Edgware - HA8

Enquiry from: Henry S

Start Date: Immediate

Take out and take away old toilet. Install new toilet supplied by customer Are you the property owner: Owner of the property What do you require in your bathroom: Toilet Have you considered replacing ...

Post a similar request >

20 Mar

Bathroom | Basin, Bath, or Toilet Fit Only

London - NW4

Enquiry from: Bhakti S

Start Date: Immediate

Submit your free quote for rated tradespeople

Post a similar request >

18 Mar

Bathroom | Basin, Bath, or Toilet Fit Only

London - W10

Enquiry from: Liya D

Start Date: Immediate

Submit your free quote for rated tradespeople

Post a similar request >

25 Oct

Bathroom | Basin, Bath, or Toilet Fit Only

Wembley - HA9

Enquiry from: Sabitha T

Start Date: Immediate

Homeowner Please contact to appoint

Post a similar request >

10 Sep

Bathroom | Basin, Bath, or Toilet Fit Only

London - NW9

Enquiry from: Sam R

Start Date: Immediate

Home Owner Call to Appoint Are you the property owner: Owner of the property Time scale: Immediate What do you require in your bathroom: Toilet, Basin What level of service do you require: Install On...

Post a similar request >

11 Aug

Bathroom | Basin, Bath, or Toilet Fit Only

London - NW10

Enquiry from: Ashish S

Start Date: Immediate

Submit your free quote for rated tradespeople

Post a similar request >

03 Nov

Bathroom | Basin, Bath, or Toilet Fit Only

London - NW9

Enquiry from: J

Start Date: Immediate

17 Mar

Bathroom | Basin, Bath, or Toilet Fit Only

Wembley - HA9

Enquiry from: Kiran P

Start Date: Immediate

Fit A replacement Roca Toilet

Post a similar request >

How it works

Tell us about your Shower or Bath Fitting project

Answer a few quick questions so we can match you with professionals who can help.

Find up to 4 Plumbers in Buckhurst Hill

Get free, no-obligation quotes from 4 verified Plumbers working in Buckhurst Hill.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

FAQs

how to fit a bath waste?

The bath waste is primarily responsible for the safe drainage of the bath once the plug is removed. Generally, it’s connected to the overflow which enables excess water to go away if the plug is in and the bath is overfilled. There are times whereby the bath waste can corrode and start to leak, so when this happens its important to replace the components so as to make sure that there’s no excessive water damage as well as other complications. This is a task any DIYer, regardless of the experience level can achieve, however if you lack the confidence to pull this off, then we’d recommend you get in touch with a professional who can guarantee the best results for help. In this guide, we aim to take you through the bath waste fitting process to ensure you do it the right way. Let’s take a look!

  • Remove the old bath waste. Do this by unscrewing the screw probably located at the centre of the waste cover. Then pull the outer cover away from the bath. Locate a larger washer underneath and lift it out, the clean the hole of any old sealant to make a smooth entry for the new waste.
  • Disconnect the connector and pipe. Locate the plastic pipe that runs from the bottom of the bath to the overflow rose high up at the bath’s end. You’ll observe a connector at each end of the pipe, remove the pipe from the connectors and unscrew both connectors.
  • Connect new fittings to new pipe. Take the new plastic waste and connect it to one end of the new plastic pipe and repeat the same process at the other end with the plastic overflow.
  • Connect to the bath. Push or screw the waste up into the hole underneath the bath and connect into the trap pipe underneath. Push the new overflow into the bath’s back and on the front then screw I the rose or the cover of the new overflow.

 

how to fit a bath?

Once you’ve chosen the perfect feature to suit the shape and style of your bathroom, it’s time to start putting it to good use. Read on for a step-by-step guide on how to install a bath, but first of all, below are the preparatory tools;

Preparation

Before you install a bath, there are some things that needs to be taken into considerations.Once you have decided where you are going to install your bath, use an electronic detector to make sure there are no hidden pipes or wires in the walls where you will be securing the fittings. It is also advisable to choose walls that have a stud so that you can attach your fittings so strongly.

When assembling your bath, lay it on top of a rug or blanket to ensure it doesn’t get scratched, and remove any protective film from the areas you will be working on, such as around the drain and tap fittings, as well as the sides where the bath will sit against the wall. Always turn off the water at the mains beforehand.

Note: The installation process will vary, depending on the design of your bath. It is always necessary to consult the manufacturer instructions alongside this guide.

MATERIALS

  • Drill and appropriate drill bit
  • Screwdriver
  • Spirit level
  • Tape measurer
  • Hammer
  • Pencil
  • Caulking gun and silicone sealant

You’ll also need an extra pair of hands to help manoeuvre the bath into place.

Step 1

Attach the legs and the fittings by securing the appropriate bolts and channels, and then attach the feet.

Step 2

Measure and adjust the bath's position, Once you are sure that your bath is level, mark the places where it will be secured into the walls and floor. If your bath comes with wall fittings, use your pencil to mark the place where they will be secured to the walls. Do the same for the floor fittings.

Step 3

Prepare the wall for the fittings, align it with the wall at the location you marked and use your spirit level to make sure it is even. Drill holes and secure in place, making sure you use fittings that are suitable for the type of walls in your bathroom.

Step 4

Secure your bath by moving the bath back into the final position and align it with the holes you created, or on top of the timber batten. Once again, check that it is level. Turn the water back on and check for any leaks.

Step 5

Seal around the rim, fill it with water and trace silicone sealant around the edges, where the rim meets the wall. Allow it to dry for the recommended time.

how much does it cost to have a bath fitted?

If you’re about to get a new bath installed in your home or property, then its only wise to carry out a research to determine the cost to complete such a project. In order to help you make the best informed decision possible, we’ve created this post gives you the price range of the purchase as well as installation of a new bath. Let’s take a look!

 

There are a number of factors that can influence the total installation cost of a bath, however the main ones include the price of the bath and the installation cost. These two components are higher for steel baths, freestanding bath and whirlpool bath when compared to shower baths and corner baths. In general, it can take within the range of £390 to £5500 to purchase ans install a new bath. Depending on the type, below are the rice range for different type of baths:

 

  • Shower bath. This is the most popular and costs within the range of £180 to £2,275 depending on the brand, material, warranty and other factors.
  • Corner baths. These can cost anywhere within the range of £213 to £1,007.
  • Steel baths. These can cost anywhere within the range of £287 to £3,360
  • Freestanding bath. These can cost anywhere within the range of £489 to £4,315
  • Whirlpool bath. These can cost anywhere within the range of £185 to £1,061

 

And while its possible to get a quick evaluation of the estimated costs when you’re planning to install a new bath, the end figure can vary. Most professional bath installer will charge anywhere between £110 to £500 depend on the type of the bath as well as how complex and intricate the task at hand is.

how much to fit a shower?

A bathroom is not only a pretty big investment, but also one that requires thorough planning and consideration before the work can be kick started. This is a task all homeowners will all have to go through at least once and even more so when things break or become worn too terribly to consider repair. As a result, when it comes to fitting a shower you can be sure to dig a bit deep into your pocket to start and get the project over the line. In general, the cost of your new bathroom tend to vary based on the shower installation company or plumber you choose to hire, your location, the materials required, the type of shower and other furnishings chosen and more. In this post, we aim to give you a good insight into the shower fitting pricing so as to help you help you make informed decisions moving forward.

 

Generally, a standard shower usually costs within the range of £100 to £120 for installation and this usually takes about 3 hours to complete. For an electric shower, you should expect to incur within the range of £100 to £150 on the plumber and a similar price range for the electrician as well. And for the shower enclosure, you can expect to pay within the range of £150 to £250 for the labour and it’ll take up to 4 hours to complete. You’ll also factor in the taps,tiling, underfloor heating, extractor fan, bath, basin and toilet.

 

Overall, for a complete renovation of your shower, you can expect to incur within the range of £3000 to £5000 with the average duration of the job being 10 days. Meanwhile for a standard installation (only for bathroom fixtures), this will often cost within the range of £2000 to £2500 with an average job length of around 5 days.

Placholder Image

Other Top Projects in Buckhurst Hill

Quotatis Customer Reviews

Overall rating:


Buckhurst Hill Shower or Bath Fitting installers are rated 4.7 out of 5 based on 9 reviews of 104 pros.
The Quotatis rating and review is an overall rating based on verified reviews and feedback from the customers with Shower or Bath Fitting projects that have been connected with Shower or Bath Fitting pros to help them. All Shower or Bath Fitting contractors All Buckhurst Hill Shower or Bath Fitting contractors

Need more help?

How to Pick the Best Bathroom Lighting for Your Home Published: 15/12/2017 It’s really important to get your bathroom lighting right. It needs to be both practical and atmospheric – a combination that’s often quite hard to achieve, especially if you’ve got a certain design in mind. We’ve put together some tips to help you get on the right track and pick the best bathroom lighting for […] Read this article
3 Ways to Add Value to your Home with Eco Plumbing Published: 14/06/2017 As a growing number of us are eco-conscious, we’re looking for different methods to save water and energy in our home. There are plenty of ways to do this, but one room people often ignore is the bathroom. You can set up various eco plumbing measures and conserve water along with money on your costs. […] Read this article
4 Bathroom Gadgets That you Can’t Live Without Published: 14/06/2017 Technology is improving all the time, and innovations for the bathroom are not neglected. You won’t believe a few of the innovations available to make our lives easier, such as a temperature-sensitive light for the tap and a glow-in-the-dark toilet locator strip. But do we require these bathroom gadgets in our restrooms? Here is some […] Read this article

Are you a plumber in Buckhurst Hill?

We can help you get more Shower or Bath Fitting work and boost your business.

Join today