Shower or Bath Fitting in Peterhead

Compare Shower or Bath Fitting Prices in Peterhead

Home > Bathrooms Projects > Shower or Bath Fitting > Peterhead

Shower or Bath Fitting in Peterhead

Are you searching for Shower or Bath Fitting in Peterhead? Our network of fitters can help with your job. All of our Plumber in Peterhead are checked so you can see local customer reviews, when the business was established, reviews, approval as well as price,  permitting you to make the appropriate choice on who to hire. Allow us take the trouble out of discovering as much as 4 professionals for your Shower or Bath Fitting task.

 

When it comes to the restroom it will not always be needed to have a complete redesign. Finishing a washroom refit can be pricey and you'll be without the water supply till the installment has actually been ended up.

 

By replacing particular washroom devices such as the toilet or shower, you'll provide the area a refresh without the expense connected with a complete refit. But bear in mind, for all installments in the shower room you'll call for the services of a respectable plumber. Besides, you're attaching to the major pipes and one incorrect action might see the area swamped.

 

Even suitable a brand-new toilet can be a headache and also depending on the layout, the drain might require to be relocated too. Guarantee to make use of a vetted expert as well as delight in the benefits of a new setup.

We will give up to four Shower or Bath Fitting pros in your area, who will certainly supply quotations for the work you desire done. You'll receive a property visit from specialists in Peterhead who'll help you to pick the right Shower or Bath Fitting for your residence prior to accomplishing the installation. Enter your postcode to begin searching now.

Average Shower or Bath Fitting cost in Peterhead

The regular cost of fitting a shower of bath is £350. Costs vary based upon the materials and the business chosen. The upper price range can be as high as £402. The material costs are typically about £87.

Average price per Shower or Bath Fitting job in 2024

Avg. price low

Avg. price low
£263

Avg. price

Avg. price
£350

Avg. price high

Avg. price high
£403

£600

£450

£300

£150

£0

Prices based on actual Shower or Bath Fitting costs for Peterhead, as reported by local Quotatis members.

Shower or Bath Fitting installation cost in Peterhead 2024

Labour cost £245
Material cost £88
Waste removal £18
Time frame: 1-3 days

Basin, shower, bath, bidet, toilet fit only searches in March 2024

Shower or Bath Fitting Projects in Peterhead in February 2024

689

Requests for quotations in Peterhead in February 2024

0

Requests for Shower or Bath Fitting quotations in Peterhead in February 2024. 0% change from January 2024.

0

Requests for Shower or Bath Fitting quotations in Aberdeenshire in February 2024. 0% change from January 2024.

Source: Numbers calculated based on the search volumes in major search engines

Basin, shower, bath, bidet, toilet fit only searches in cities and towns near Peterhead February 2024

Peterhead

Peterhead is a community in Aberdeenshire, Scotland. It is Aberdeenshire's greatest negotiation, the city of Aberdeen itself not belonging of the district, with a permanent resident populace of 18,537 at the 2011 Census. Peterhead is situated at the easternmost factor in landmass Scotland. The town was founded by anglers and also was established as a planned negotiation. In 1593 the building and construction of Peterhead's initial harbour, Port Henry, motivated the development of Peterhead as an angling port and established a base for trade. It is commonly described as Heaven Toun, and also individuals that were birthed there as Blue Touners. A lot more properly, they are called blue mogginers, allegedly acquiring from the blue worsted moggins or stockings that the fishermen originally put on. A brand-new stage of growth started in the 1970's with Peterhead becoming a significant oil industry service centre, as well as the completion of the close-by St Fergus gas terminal. Right now, significant land holdings were alloted for commercial advancement. Although the community has experienced the closures of a number of firms, it preserves a relatively diverse economic climate, consisting of food handling, fabrics, service industries and also, still notably, fishing. Over 90,000 tonnes of fish, with a worth of around £60m are now landed at Peterhead. The Peterhead Port Authority plans to extend the northern breakwater as a stimulation to the community's economic growth. In addition, to aid with service diversification and also town centre ecological enhancements, the 'Peterhead Project' effort under the Aberdeenshire Towns Collaboration brings together the Council, Scottish Business Grampian, Communities Scotland, commerce and area agents. For all of your home upgrades, ensure to utilize trustworthy professionals in Peterhead to make specific of top quality.

Looking for Shower or Bath Fitting in Peterhead?

Get free quotes from local plumbers

Get free quotes

Similar Customer Enquiries for Shower or Bath Fitting in Peterhead

07 Jul

Bathroom | Basin, Bath, or Toilet Fit Only

Peterhead - AB42

Enquiry from: Brian E

Start Date: Immediate

Skip suitable for bathroom update 27th July —31july

Post a similar request >

How it works

Tell us about your Shower or Bath Fitting project

Answer a few quick questions so we can match you with professionals who can help.

Find up to 4 Plumbers in Peterhead

Get free, no-obligation quotes from 4 verified Plumbers working in Peterhead.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

FAQs

who fits an electric shower?

If you just acquired an electric shower or thinking about getting one soon, one of the first things that comes to mind is who to call on for help to handle its installation. Well, if you’re confused about the perfect tradesperson you’re certainly not alone! As we’re always told that electrics and water don’t mix, so who do you call when buying an electric shower? Is it a plumber, an electrician or probably someone who with a knowledge of both? Well, you’d find the answer here as we’ve created this post specifically to resolve this concern once and for all.

 

Refurbishing and renovating any part of one’s home always tends to be a tricky and daunting prospect and without a single doubt, the bathroom is not an exception. With a wide array of things to put into consideration such as plumbing as well as bathroom electrical safety, it always pays to have all your bathroom related questions answered before you go ahead to employ a tradesperson.

 

Being fully aware any task involving electrical works can be very dangerous, anyone that takes on a job such as fitting an electric shower must be qualified to work with electrics safely. This is referred to in the building regulations sections which is termed as part P dealing with domestic electricals, as such you may hear tradespeople term themselves as being “Part P qualified. What this implies is that they’re registered with a competent persons scheme like ELESCA OR NICEIC to self certify their work. Due to the high risk involved in their field, all electricians should be able to self certify their work, whereas only some plumbers should also be able to do the same. As a result, dedicated bathroom fitting companies should possess individuals who can deal with the plumbing, electrics as well as tasks such as tiling.

how much does it cost to have a bath fitted?

If you’re about to get a new bath installed in your home or property, then its only wise to carry out a research to determine the cost to complete such a project. In order to help you make the best informed decision possible, we’ve created this post gives you the price range of the purchase as well as installation of a new bath. Let’s take a look!

 

There are a number of factors that can influence the total installation cost of a bath, however the main ones include the price of the bath and the installation cost. These two components are higher for steel baths, freestanding bath and whirlpool bath when compared to shower baths and corner baths. In general, it can take within the range of £390 to £5500 to purchase ans install a new bath. Depending on the type, below are the rice range for different type of baths:

 

  • Shower bath. This is the most popular and costs within the range of £180 to £2,275 depending on the brand, material, warranty and other factors.
  • Corner baths. These can cost anywhere within the range of £213 to £1,007.
  • Steel baths. These can cost anywhere within the range of £287 to £3,360
  • Freestanding bath. These can cost anywhere within the range of £489 to £4,315
  • Whirlpool bath. These can cost anywhere within the range of £185 to £1,061

 

And while its possible to get a quick evaluation of the estimated costs when you’re planning to install a new bath, the end figure can vary. Most professional bath installer will charge anywhere between £110 to £500 depend on the type of the bath as well as how complex and intricate the task at hand is.

how to fit a bath?

Once you’ve chosen the perfect feature to suit the shape and style of your bathroom, it’s time to start putting it to good use. Read on for a step-by-step guide on how to install a bath, but first of all, below are the preparatory tools;

Preparation

Before you install a bath, there are some things that needs to be taken into considerations.Once you have decided where you are going to install your bath, use an electronic detector to make sure there are no hidden pipes or wires in the walls where you will be securing the fittings. It is also advisable to choose walls that have a stud so that you can attach your fittings so strongly.

When assembling your bath, lay it on top of a rug or blanket to ensure it doesn’t get scratched, and remove any protective film from the areas you will be working on, such as around the drain and tap fittings, as well as the sides where the bath will sit against the wall. Always turn off the water at the mains beforehand.

Note: The installation process will vary, depending on the design of your bath. It is always necessary to consult the manufacturer instructions alongside this guide.

MATERIALS

  • Drill and appropriate drill bit
  • Screwdriver
  • Spirit level
  • Tape measurer
  • Hammer
  • Pencil
  • Caulking gun and silicone sealant

You’ll also need an extra pair of hands to help manoeuvre the bath into place.

Step 1

Attach the legs and the fittings by securing the appropriate bolts and channels, and then attach the feet.

Step 2

Measure and adjust the bath's position, Once you are sure that your bath is level, mark the places where it will be secured into the walls and floor. If your bath comes with wall fittings, use your pencil to mark the place where they will be secured to the walls. Do the same for the floor fittings.

Step 3

Prepare the wall for the fittings, align it with the wall at the location you marked and use your spirit level to make sure it is even. Drill holes and secure in place, making sure you use fittings that are suitable for the type of walls in your bathroom.

Step 4

Secure your bath by moving the bath back into the final position and align it with the holes you created, or on top of the timber batten. Once again, check that it is level. Turn the water back on and check for any leaks.

Step 5

Seal around the rim, fill it with water and trace silicone sealant around the edges, where the rim meets the wall. Allow it to dry for the recommended time.

how to fit a bath waste?

The bath waste is primarily responsible for the safe drainage of the bath once the plug is removed. Generally, it’s connected to the overflow which enables excess water to go away if the plug is in and the bath is overfilled. There are times whereby the bath waste can corrode and start to leak, so when this happens its important to replace the components so as to make sure that there’s no excessive water damage as well as other complications. This is a task any DIYer, regardless of the experience level can achieve, however if you lack the confidence to pull this off, then we’d recommend you get in touch with a professional who can guarantee the best results for help. In this guide, we aim to take you through the bath waste fitting process to ensure you do it the right way. Let’s take a look!

  • Remove the old bath waste. Do this by unscrewing the screw probably located at the centre of the waste cover. Then pull the outer cover away from the bath. Locate a larger washer underneath and lift it out, the clean the hole of any old sealant to make a smooth entry for the new waste.
  • Disconnect the connector and pipe. Locate the plastic pipe that runs from the bottom of the bath to the overflow rose high up at the bath’s end. You’ll observe a connector at each end of the pipe, remove the pipe from the connectors and unscrew both connectors.
  • Connect new fittings to new pipe. Take the new plastic waste and connect it to one end of the new plastic pipe and repeat the same process at the other end with the plastic overflow.
  • Connect to the bath. Push or screw the waste up into the hole underneath the bath and connect into the trap pipe underneath. Push the new overflow into the bath’s back and on the front then screw I the rose or the cover of the new overflow.

 

Placholder Image

Other Top Projects in Peterhead

Quotatis Customer Reviews

Overall rating:


Peterhead Shower or Bath Fitting installers are rated 5 out of 5 based on 1 reviews of 3 pros.
The Quotatis rating and review is an overall rating based on verified reviews and feedback from the customers with Shower or Bath Fitting projects that have been connected with Shower or Bath Fitting pros to help them. All Shower or Bath Fitting contractors All Peterhead Shower or Bath Fitting contractors

Need more help?

How to Pick the Best Bathroom Lighting for Your Home Published: 15/12/2017 It’s really important to get your bathroom lighting right. It needs to be both practical and atmospheric – a combination that’s often quite hard to achieve, especially if you’ve got a certain design in mind. We’ve put together some tips to help you get on the right track and pick the best bathroom lighting for […] Read this article
3 Ways to Add Value to your Home with Eco Plumbing Published: 14/06/2017 As a growing number of us are eco-conscious, we’re looking for different methods to save water and energy in our home. There are plenty of ways to do this, but one room people often ignore is the bathroom. You can set up various eco plumbing measures and conserve water along with money on your costs. […] Read this article
4 Bathroom Gadgets That you Can’t Live Without Published: 14/06/2017 Technology is improving all the time, and innovations for the bathroom are not neglected. You won’t believe a few of the innovations available to make our lives easier, such as a temperature-sensitive light for the tap and a glow-in-the-dark toilet locator strip. But do we require these bathroom gadgets in our restrooms? Here is some […] Read this article

Are you a plumber in Peterhead?

We can help you get more Shower or Bath Fitting work and boost your business.

Join today