UK FASCIAS LIMITEDBased: in Bridgwater, TA7 8HL
Carol A., TA9
Roofline | Soffits / Fascias in Highbridge
Excellent. Helpful, speedy and very efficient. Pleasant people to deal with, thank you
Fascias and soffits are a critical aspect of the majority of guttering systems. Not only do they offer support for the guttering itself, they enhance the design of your property by creating a clean and neat finish to the roofline. Fascias or fascia boards are horizontal boards that sit on the edge of the rafters of your roof, closing the end of the roof and providing the support that the guttering is fixed to. Soffits run under the fascia boards, closing the gap and protecting the underside of the rafter ends. Soffits are usually ventilated to help the roof timbers to breathe and also to prevent any moisture accumulation. Box ends are used where the horizontal fascia meets the diagonal barge board that runs up the edge of the roof profile, presenting a neat finish to an otherwise ugly join.
Fascias and soffits are normally created from either timber or UPVC. Timber fascias and soffits are usually on older properties and continue to be popular. However, wooden fascias and soffits can rot over time and expose the rest of the guttering to problems or leaks. More recently, UPVC fascias and soffits have been increasingly popular as they offer a resilient option that won't rot. UPVC fascias and soffits are available in a variety of colours to fit any property, although white is popular as it offers a traditional appearance. Fascias are additionally available in ogee moulded designs, where feature grooves are integrated. These can have a striking effect.
How much replacing your soffits and fascias costs depends on several things, including the size of your property, the materials you use and where you live. However, the cost of a soffits and fascias project tends to range between £1,300 and £2,000 for most people.
|Avg. price low|| |
Avg. price low
|Avg. price|| |
|Avg. price high|| |
Avg. price high
Requests for quotations in Hinton St George in November 2021
Requests for Soffits and Fascias quotations in Hinton St George in November 2021. 0% change from October 2021.
Requests for Soffits and Fascias quotations in Somerset in November 2021. 1000% change from October 2021.
We noted 84 requests for property or home quotations within Hinton St. George. Of these quotation requests the amount of soffits and fascias quotes in Hinton St. George was 1. Quotatis would have been able to match these customers with up to four suitable installers who were available for work within Hinton St. George at that time. Ask for a free home survey from reliable companies in Hinton St. George.Source: Numbers calculated based on the search volumes in major search engines
Hinton St George is a town and also church in Somerset, England, positioned 3 miles (4.8 kilometres) outside Crewkerne, 10 miles (16.1 kilometres) south west of Yeovil in the South Somerset area. The town has a population of 442. It has a broad major road lined with hamstone cottages, some thatched. The town has a growing store. The town does not rest on a major road, as well as has a couple of vacation cottages as well as second residences. The parish belonged to the hundred of Crewkerne. Much of the advancement of the village occurred under the lords Poulett extending their large house and also estate (Hinton House). By the 1560s the three open arable fields had been enclosed and also two big estates of 74 as well as 68 acres (280,000 m2) created, based upon the currently gone away hamlet of Craft. The park included deer and also orchards, with cherry trees. The town cross is an 8 feet 2 inches (2.49 m) high cross with a tapering octagonal shaft on tipped octagonal base. It is a scheduled monolith and also Grade II * listed structure.
Excellent. Helpful, speedy and very efficient. Pleasant people to deal with, thank you
HERE AT QTS NATIONAL WE AIM TO DELIVER THE HIGHEST QUALITY OF WORKMANSHIP AT A COMPETITIVE FAIR PRICE WITH ARE GUYS HAVING OVER 20 YEARS OF EXPERIENCE YOU CAN ASSURE WE GO THE EXTRA MILE TO DO A PERFECT JOB IF YOU WANT A CLEAN RELIABLE RELI...
Did not continue with the company after receiving suitable estimate
Hello my name is Terry from TPS roofing and maintenance I’ve been in business now for 15 years I do PVC facias soffits gutters and downpipes roof repairs new roofs fencing All types I do good quality work for a fair price look forward to meeting...
Got the job done really quickly and to a great standard. Thank you!
Excellent response time, very competitive quote. Job completed within 5 hours. Great workmanship and left my place spotl...
Pleasant enough but the verbal quote given was too far outside my budget.
Answer a few quick questions so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Gutter Installers working in Hinton St George.
Compare customer reviews, services and prices, and choose the right professional for you.
Based on 1103 reviews
Every year, various parts of your roof may need to be changed at one point or the other. Due to the fact that this event can occur at any time in a year, there’s the need to be fully ready. When it comes that being ready, you simply can’t overlook the importance of soffit and fascia boards in protecting your roof space and helping it maintain its clean and unique visual appeal. As a result, when your soffit and fascia boards need to be changed, you best do so as quickly as possible.
This task can be completed by anyone with basic DIY knowledge and experience, but if you lack the confidence to pull off then it’ll be advisable to hire a professional who can guarantee the best results for help.
✓ Remove the old existing boards. In order to install the new soffit and fascia boards, you’d have to remove the existing ones first. If necessary, you can make use of a Stanley knife to make the process much easier.
✓ Fixing soffit boards. Several soffit boards are made using uPVC. The boards are to fixed to the underside of your timber rafter ends. Make sure to use timber to close any gaps between soffit boards and also make sure that your soffit boards’ back are resting against the wall’s top.
✓ Fixing fascia boards. Many fascia boards are also made from uPVC and are usually installed in a similar way to soffit boards. Use a minimum of two nails to make sure they’re secure enough to hold weight of any roof tiles and also to prevent any buckling.
✓ Guttering and felt. To start the guttering, you’d have to screw any brackets into the facia board. You can use a spirit levelto make sure the alignment is perfect to enable the floe of water directly through your guttering system. Once done, you should also check for any rotting roof felt at the edges closest to the gutterin. If there is a rot, make use of eaves felt trays and tuck under existing felt and overlap into the guttering
Soffits are constructed by homeowners on their properties for several purposes. Not only are they incorporated to hide away the unsightly features of a home, but they can also be used to add decorative architectural detail. Soffits construction, on the other hand, is a project that can be done by any DIY person with the knowledge and experience. However, if you lack the confidence to pull this off, then we’d strongly recommend you get in touch with a reliable professional who can guarantee the best results, the first time. In this guide, we’re are going to take you through the soffit construction process.
✓ Measure and mark. The first step is to take an accurate measurement of the size of your propose soffit and use a pencil to mark it out on both the wall and ceiling. The size of your soffits is mainly determined by your needs or preferences.
✓ Cut and Install Wall & Ceiling Plates. Proceed to cut the wall as well as ceiling plates once the dimensions have been marked. Make use of 2x4 lumber, you can cut to size with the help of a table saw or mitre. Once done, you can then attach it to the wall as well as ceiling studs with a framing nail gun.
✓ Build the box frame. Develop a box-frame from 2x4 lumber, using your measurements as guide.
✓ Fit the box frame. Hold the box frame in place with some slide clamps and then attach it to the ceiling and wall plates with drywall screws.
✓ Mark the studs. Make use of a pencil to mark out the studs location on your soffit box frame.
✓ Cut and hang the drywall. Cut the drywall with a utility knife uing your measurement as a guide. Once done, attach the drywall to the framework with the help of drywall screws.
✓ Add finishing touches. This includes installing the corner beads, finishing off with the common drywall work of taping, spackling and sanding. Once the spackle is dry, you can the complete it by painting the soffit.
Soffit is a word gotten from two languages - French and Latin, whereby the root word implies to “form as a ceiling in French, while it means to “to fix underneath in Latin. Basically, soffit is a portion of the ceiling that has been constructed lower than the area that surrounds it. And even though they aren’t that much popular in recent times, they happen to be a common feature in kitchens of older homes in the UK. At times, a soffit can occupy the whole room or area in a home.
Homeowners across the globe make use of this feature mostly as a decorative element in the room , however, there are also times in which they may be required for various purposes. These purposes include using soffits to conceal plumbing pipes or, heating or cooling ducts, which is often the case when sofits are constructed at the lower levels of homes. They’re also often incorporated in bathrooms or kitchens as soffits house light fixtures. For instance, recessed light fixtures fitted over kitchen or bathroom sinks are mostly fitted into a soffit. What’s more? Soffit can also be required in a room because of the home’s structure as the feature can be used to hide a structural beam.
If you happen to own an older home and you’d like to remove an existing soffit, the first step is to ensure that its safe to carry out such plan. You should firstly check for any electrical lines, ductwork, lighting or structural problems that may exist prior to the commencement of the project. If you’re not sure or confident enough to pull this off, then it’s advisable to consult a professional contractor before you proceed.
In general uPVC is used for soffits and fascias as it is very strong and durable. It also requires very little maintenance. However, wood can be used and is still popular on listed properties as it retains the original material. Older and listed buildings may require more traditional materials to be used.
We can help you get more Soffits and Fascias work and boost your business.Join today