Solar Thermal Panels (Supply-only) in Belvedere

Compare Solar Thermal Panels (Supply-only) Prices in Belvedere

Home > Solar Panels Projects > Supply-only solar thermal panels > Belvedere

Average Supply-only solar thermal panels cost in Belvedere

The common cost of Supply-only solar thermal panels is £2850. Costs differ based on the materials and the organisation picked. The upper price range can be as high as £4275. The material costs are ordinarily approximately £2800

Average price per Supply-only solar thermal panels job in 2022

Avg. price low

Avg. price low
£2,280

Avg. price

Avg. price
£2,850

Avg. price high

Avg. price high
£4,275

£4400

£3300

£2200

£1100

£0

Prices based on actual Supply-only solar thermal panels costs for Belvedere, as reported by local Quotatis members.

Supply-only solar thermal panels installation cost in Belvedere 2022

Material cost £2,800
Waste removal £50
Time frame: 1 day

Supply-only solar thermal panels searches in May 2022

Supply-only solar thermal panels Projects in Belvedere in April 2022

366

Requests for quotations in Belvedere in April 2022

0

Requests for Supply-only solar thermal panels quotations in Belvedere in April 2022. 0% change from March 2022.

0

Requests for Supply-only solar thermal panels quotations in Kent in April 2022. 0% change from March 2022.

Source: Numbers calculated based on the search volumes in major search engines

Supply-only solar thermal panels searches in cities and towns near Belvedere April 2022

The South East of England is one of the country's nine regions and is also the largest when it comes to population size. The region has around 8.6 million occupants, and although it contains a significant land area, its population density is around 452 people per square kilometre. South East England contains a variety of counties such as Kent, Surrey, East and West Sussex, Hampshire, Buckinghamshire and Berkshire. The populace has expanded greatly over the last ten years, specifically because of the significant conurbations of regions such as Brighton, Portsmouth, Reading and Southampton. The South East is infamous for higher home prices so keep this value on your property with upgrades from expert tradespeople.

Looking for Supply-only solar thermal panels in Belvedere?

Get free quotes from local solar panel installers

Get free quotes

How it works

Tell us about your Supply-only solar thermal panels project

Answer a few quick questions so we can match you with professionals who can help.

Find up to 4 Solar Panel Installers in Belvedere

Get free, no-obligation quotes from 4 verified Solar Panel Installers working in Belvedere.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

FAQs

Can I install solar thermal panels myself?
In theory, you can install solar thermal panels yourself. But it’s best to leave it to professionals. We’ll explain why here. Solar thermal panels work in a similar way to solar PV panels. They use collectors, in the form of evacuated tubes or flat plate collectors, to collect heat from the sun and use it to heat up water that’s stored in a hot water cylinder. You can use a boiler or immersion heater as a back-up to heat the water further so it’s at the temperature you want. So should you install a solar thermal system yourself? It certainly seems tempting since you can buy full solar thermal DIY kits with everything you need for £1,500 to £2,000. To have a solar hot water system installed by a professional, you’re looking at between £5,000 and £6,000, so it looks like there’s a significant saving to be made. However, if you want to take advantage of the Renewable Heat Incentive (RHI) payments, which is a Government scheme where you’re paid for using a renewable energy source to heat your home and/or its hot water, you can’t install it yourself. You need to engage a Microgeneration Certification Scheme-registered installer who can issue you with a certificate to say that the solar thermal panels have been installed correctly. For a 4m2 system that serves a 4-person household, the payments could be up to £375 per year. That means you could pay your system off within 14 years, and that’s not taking into account any of the savings you’ll make on your energy bills. So, while you can install solar thermal panels yourself, it’s much better in the long term to have them installed by an MCS-registered company.
Is solar thermal worth it in the UK?
We certainly think solar thermal is worth it in the UK. While we have cold winters that affects the amount of sunlight we get during those months, solar thermal panels can still generate a little heat in the winter on sunny days, and your back-up boiler or immersion heater can do the rest. The average cost of a 6m2 solar thermal system in the UK is £4,500. While that might seem like a lot of money up front, you’ll be able to make back some of that cost through Renewable Heat Incentive (RHI) payments. The RHI is a Government scheme that pays you for every unit of renewable heat that you generate, and a 6m2 system could earn you up to £525 per year over seven years. That means you could end up paying less than £1,000 for free renewable heat for your home! As well as the RHU, you’ll see a saving on your fuel bills since you’ll be less reliant on your traditional form of heating. If you have a natural gas boiler, you could save up to £60 a year on your bills, while if you’re switching from LPG the savings could be as much as £100 per year. So, we definitely think solar thermal is worth it in the UK! Plus, you’ll be reducing your carbon footprint and contributing to cleaner air for everyone in the country, so you can feel good knowing that you’re doing your bit.
Can solar thermal be used for central heating?

Yes – solar thermal can be used for central heating. Solar thermal panels work by collecting heat from the sun, either through evacuated tubes or flat plate collectors, and transferring that to a heat transfer liquid that heats your hot water. This can then be used to preheat your central heating.

You’ll need a hot water cylinder to store the water that your solar thermal panels heat up. It’s likely that you’ll need an immersion heater or boiler to heat the water further so you can use it for your central heating, and as a back-up during the longest winter months since the solar panels won’t be able to generate as much heat.

In our opinion, it’s best to use your solar thermal panels for hot water rather than your central heating. That’s because you use hot water all year round, whereas you probably won’t have your central heating on in the spring and summer, when the panels can generate the most heat. For central heating, air- or ground-source heat pumps are a great renewable option, and you can even power them with electricity from solar PV panels if you want to be as eco-friendly as possible.

Who makes solar thermal panels?

There are a few trusted companies in the UK that make solar panels. While there are other solar thermal panels out there that are made by Chinese and American companies, we’ll focus on the brands with a longstanding presence in the UK since these are the panels MCS-registered solar companies are likely to recommend to you.

Viessmann, Worcester Bosch, Solar UK and Dimplex make some of the best solar thermal panels in the UK. Dimplex and Viessmann offer both flat plate and evacuated tube solar panels, while Solar UK only offers evacuated tubes. Worcester Bosch’s Greenskies range are all flat plate collectors. Viessmann’s panels come with a 5-year warranty, while Worcester Bosch and Dimplex offer extensive 10-year warranties. However, Solar UK offer a comprehensive 25-year warranty and guarantee that the panels will deliver the same level of performance for 25 years!

We’d recommend choosing evacuated tube solar thermal panels because they are the most efficient. While there won’t be much difference between evacuated tubes and flat plates in the summer, in the winter evacuated tubes are much better at taking heat from the sun than flat plates. Since our winters are long and cold with few daylight hours, we think it makes sense to go with evacuated tubes. However, if your priority is looks over maximising efficiency, you might want to choose flat plate collectors since they sit flat on the roof and look more like solar PV panels, whereas the evacuated tubes will stick out.

Placholder Image

Other Top Projects in Belvedere

Need more help?

Smart Export Guarantee: Everything you Need to Know Published: 08/07/2019 Weighing up installing solar panels? Or looking for the best way to benefit from your new PV solar panel system? The government are currently confirming details of the Smart Export Guarantee – a system to help you get financial reward for exporting renewable energy to the national grid. This is on top of the savings […] Read this article
Maximise your Solar Panels with a Solar Battery Published: 21/06/2019 Did you know that in just one hour the sun radiates more energy than the whole world uses in a year? That’s free energy that the vast majority of us are missing out on, but solar battery storage systems are changing the game! Most of us know that solar panels save you money on your […] Read this article
4 Steps to Getting the Best Solar Panels on the Market Published: 19/04/2019 If you’re thinking about investing in solar PV, it’s important to make sure that you get the best solar panels for you and your home. This includes picking the right manufacturer, type of panel and installer. Installing solar panels can be quite a big investment, so it’s worth taking the time to get it right. […] Read this article

Are you a solar panel installer in Belvedere?

We can help you get more Supply-only solar thermal panels work and boost your business.

Join today