Bathroom | Basin, Bath, or Toilet Fit Only
Runcorn - WA7
Enquiry from: Amy W
Start Date: Immediate
New toilet fitting due to old one fully cracked
Over 35 reviews & an average rating of 4.6/5 stars, you'll find the right pro
Use the shortlist button to select up to 4 tradespeople, enter your project details and press send
Get up to 4 quotes from local Bathroom Fitters near you
Runcorn - WA7
Enquiry from: Amy W
Start Date: Immediate
New toilet fitting due to old one fully cracked
Manchester - M25
Enquiry from: Maria W
Start Date: Immediate
tiles, bath and sink removing. new tiling (only partial tiling around shower toilet and sink), installation of new shower and sink. keeping the flooring but will probably need to lay an additional few...
Stockport - SK7
Enquiry from: Laura M
Start Date: Immediate
1200 corner bath new toilet fitted
Rochdale - OL16
Enquiry from: Azhar H
Start Date: Immediate
Budget makeover. New bath, toilet and basin. Walls and floor made good (vinyl floor will be fine) pipe work concealed for a rental property in Rochdale.
Altrincham - WA15
Enquiry from: Ding Y
Start Date: Immediate
Hi, I was wondering if you provide consultations/advice on issues with already installed tiling/shower?
Manchester - M25
Enquiry from: Hannah S
Start Date: Immediate
About to get the keys to my first house and would like to renovate the bathroom prior to moving in Will need a new floor, new sink and tiling and new shower Thanks Hannah
Manchester - M41
Enquiry from: Wendy F
Start Date: Immediate
Refit small bathroom in ground floor flat. Take out bath and fit walk in shower suitable for elderly resident.
Oldham - OL8
Enquiry from: Sheila R
Start Date: Immediate
Need wall extractror fan i9n my kitchen. There is an air brick brick on exterior wall. Want fan to be placed same site interior
Salford - M5
Enquiry from: Callum K
Start Date: Immediate
I'm looking for someone to remove a glass bath/shower screen, and install a new one that I'll purchase separately. Please could you provide a quote for this work? Thanks, Callum Kirkwood
Liverpool - L9
Enquiry from: Kellie R
Start Date: Immediate
A wet room screen supply and fit
Altrincham - WA15
Enquiry from: Christine A
Start Date: Immediate
Old bathroom pulled out and new walk in shower oiletsink and vanity unitstorage unit and walls retiled depending on advice
Manchester - M4
Enquiry from: Seb D
Start Date: Immediate
Hello, I'd love to introduce you to Gaydio, both the UK's leading LGBTQ+ radio station and largest not-for-profit community station, with over 535,000 weekly listeners, based here in Manchester. ...
Macclesfield - SK10
Enquiry from: Anna B
Start Date: Immediate
hi there i am just looking for a bath screen to be supplied and fitted to a tiled wall next to the bath. many thanks anan are you the property owner: owner of the property what do you require in your...
Hyde - SK14
Enquiry from: Peachy D
Start Date: Immediate
En suite bathroom renovation. Would also like for a wall to be knocked down and shower installed.
Manchester - M23
Enquiry from: Simon L
Start Date: Immediate
Complete redesign of bathroom
Lymm - WA13
Enquiry from: Jan L
Start Date: Immediate
Fully supply and instal new bathroom. Including walls and floors etc
Manchester - M8
Enquiry from: MUBASHAR K
Start Date: Immediate
We need to get designed a room in bathroom
Manchester - M20
Enquiry from: Monica W
Start Date: Immediate
Change current bath to an average size one.
Manchester - M23
Enquiry from: Adrian F
Start Date: Immediate
We require 4 Bathrooms installing in a new build
Manchester - M25
Enquiry from: Phil S
Start Date: Immediate
New shower tray, and unit, maybe new tiles. The bathroom needs updating so i'm open to options.
How much do Bathroom Fitters cost? Costs for Bathroom Fitters in 2024 can differ relying on the type of job that you want to have carried out in your house. It's the question we get asked a whole lot "how much do Bathroom Fitters cost?".
If you’re about to fit a new bathroom in your home, then you’d probably be wondering how much would be the labour cost of getting it done. Unfortunately, a single accurate answer can’t be provided to this question as there are many influencing factors that can determine the labour cost to fit a new bathroom. In this guide, we’ll give you a good insight on bathroom fitters charge to help you make informed decisions.
While you can obtain a good evaluation when planning the work on your bathroom, the final cost can largely vary. For small jobs such as fitting a pedestal basin with taps, professional installers can charge within the range of £170 to £250. Meanwhile, bigger projects such as tiling an entire bathroom can cost an average fee of about £70 to £90 per square metre. Generally, the overall average cost of fitting a new bathroom is about £6,500 in the UK. But in an event whereby you’ll be switching to a bathroom suite that’s exactly like the old one which wouldn’t require extra flooring as well as tiling, there’s a high chance you may be able to complete the project for a significantly lesser price.
The main reason why the labour costs vary is due to the fact that each individual job will have to be priced based on its own particular requirements and circumstances. Other influencing factors that’ll affect how easy a job is to complete, how much material will be incorporated and the duration of the project includes the size of the bathroom in question as well as the shape. However, there can be unforeseen complications like damaged piping which will also raise the price of the project and more.
View our Bathroom Fitter cost guide View our Bathroom Fitter adviceBathroom Fitter job | Bathroom Fitter cost in 2024 |
---|---|
Bathroom fitting in North West | £1,670-£4,380 |
Bathroom design and install in North West | £3,175-£6,675 |
Shower or Bath Fitting in North West | £382-£1,452 |
Shower installation in North West | £1,295-£3,818 |
Shower supply and installation in North West | £1,050-£1,960 |
Toilet Fitting in North West | £368-£1,445 |
Regardless of the quality or how perfect the products for your new bathroom are, getting the right bathroom fitter for your bathroom refit is just as important to your project as any other thing you can possibly think of. Hiring a fitter is quite simple, but hiring a fitter who can get the job done to your requirements is another thing entirely. To hire the right bathroom fitter, there’s the need to consider all the features of a bathroom as well as any specialized products you may have selected. For instance, you’re going to need a professional tiler if you have quartz resin tiles. Also, if you wish to fit some luxurious underfloor heating, you’d need the services of a qualified electrician. Here are some of the questions you should ask from your bathroom fitter when having your bathroom fitted.
Surprisingly, bathroom renovations usually involves a wide range of trades to complete. And to make sure the work is done to a standard accepted by building regulations, some of these trades is required to have some particular legal qualifications. Therefore, if you’re interested in getting a new bathroom project done, you’ll probably need to call in more than just your plumber.
Below are the different trades you may need to successfully install a new bathroom:
✓ Plumber - The plumber’s task would be to install the new bathroom’s pipework and reposition and fit the bathroom items as needed.
✓ Tiler - To remove old tiles ( if any), prepare and tile the walls and/or floor.
✓ Labourer - To detach the old suite, strip out old tiles as well as floor covering etc.
✓ Plasterer - To skim the ceiling or board out the walls before you tile or plaster.
✓ Joiner - To re-hinge doors or construct studwork. For instance, when including a new bathroom to a bedroom.
✓ Painter - To paint the newly skimmed ceiling with the help of anti mould bathroom.
✓ Electrician - To install underfloor heating, ceiling spotlights, an extractor fan or a shaver point.
✓ A builder - A general builder will be required if your new bathroom project requires any structural work to be carried out such as installing a new uPVC window, putting in an RSJ and lots more.
✓ A decorate - As the name suggests, the decorator can come in to make the bathroom look a lot more attractive and to finish the job.
And above all, to ensure proper coordination and success of the project, you’ll also need a person who’ll serve as the lynchpin in charge of the entire project.
Once you’ve chosen the perfect feature to suit the shape and style of your bathroom, it’s time to start putting it to good use. Read on for a step-by-step guide on how to install a bath, but first of all, below are the preparatory tools;
Preparation
Before you install a bath, there are some things that needs to be taken into considerations.Once you have decided where you are going to install your bath, use an electronic detector to make sure there are no hidden pipes or wires in the walls where you will be securing the fittings. It is also advisable to choose walls that have a stud so that you can attach your fittings so strongly.
When assembling your bath, lay it on top of a rug or blanket to ensure it doesn’t get scratched, and remove any protective film from the areas you will be working on, such as around the drain and tap fittings, as well as the sides where the bath will sit against the wall. Always turn off the water at the mains beforehand.
Note: The installation process will vary, depending on the design of your bath. It is always necessary to consult the manufacturer instructions alongside this guide.
MATERIALS
You’ll also need an extra pair of hands to help manoeuvre the bath into place.
Step 1
Attach the legs and the fittings by securing the appropriate bolts and channels, and then attach the feet.
Step 2
Measure and adjust the bath's position, Once you are sure that your bath is level, mark the places where it will be secured into the walls and floor. If your bath comes with wall fittings, use your pencil to mark the place where they will be secured to the walls. Do the same for the floor fittings.
Step 3
Prepare the wall for the fittings, align it with the wall at the location you marked and use your spirit level to make sure it is even. Drill holes and secure in place, making sure you use fittings that are suitable for the type of walls in your bathroom.
Step 4
Secure your bath by moving the bath back into the final position and align it with the holes you created, or on top of the timber batten. Once again, check that it is level. Turn the water back on and check for any leaks.
Step 5
Seal around the rim, fill it with water and trace silicone sealant around the edges, where the rim meets the wall. Allow it to dry for the recommended time.
Fitting a wall hung toilet in your home or property bring about a plethora of benefits. Not only are they a feat of modern washroom design, but they’re also able to offer a wealth of practical benefits. Given the fact that the cistern and pipework are all going to be concealed within a duct system, the areas that’ll be exposed is significantly reduced. This, ultimately, protects them from accidental damage and tampering, and also leaves a flush, easy to clean surface which goes a long way to improve the hygiene in your washroom.
Fitting a wall hung toilet can be a tricky and time consuming task especially if you don’t know what you’re doing. If you lack the confidence to pull this off, it’s advisable to hire the services of a plumber who can guarantee the best results for help. So how do you fit a wall hung toilet?
Being one of the most used and important rooms in any house, the bathroom should be looking its best every single time. We make use of it on a daily basis to maintain hygiene and health and also to get ready every morning. Truth is, it may be a relatively small space, but the bathroom has a significant impact on our everyday life. As a result, we should make an effort to make the bathroom as appealing as possible, so we get to enjoy it even better. If you’re wondering how to decorate your bathroom, then you’ve come to the right place! In this guide, we’re going to give you some tips to make your bathroom look its possible best. Let’s take a look!
If you’re about to get a new bath installed in your home or property, then its only wise to carry out a research to determine the cost to complete such a project. In order to help you make the best informed decision possible, we’ve created this post gives you the price range of the purchase as well as installation of a new bath. Let’s take a look!
There are a number of factors that can influence the total installation cost of a bath, however the main ones include the price of the bath and the installation cost. These two components are higher for steel baths, freestanding bath and whirlpool bath when compared to shower baths and corner baths. In general, it can take within the range of £390 to £5500 to purchase ans install a new bath. Depending on the type, below are the rice range for different type of baths:
And while its possible to get a quick evaluation of the estimated costs when you’re planning to install a new bath, the end figure can vary. Most professional bath installer will charge anywhere between £110 to £500 depend on the type of the bath as well as how complex and intricate the task at hand is.
It's not a difficult task to replace an old toilet, as long as you can connect it to an existing branch of the soil pipe. You can cut your water usage significantly by fitting a dual flush toilet mechanism.
Step 1
Follow the manual's guidelines, assemble and insert the flush mechanism. Make sure you include the rubber sealing rings where necessary.
Step 2
Place the large rubber gasket into the flush ingang of the pan.
Step 3
Insert the bolts through the holes in the cistern, using the rubber and large metal washers supplied.
Step 4
Lift the cistern into the pan so the connecting bolts fit through the holes. The threaded section of the flush mechanism should go through the rubber gasket on the flush entrance of the pan.
Step 5
Fit washers to the connecting bolts, and tighten the wing nuts. Make sure you fit these securely - but don't over-tighten them.
Step 6
check if there are no either pipes or cables below the fixing points. Put the toilet in place, and slide the pan outlet into the flexible connector that's attached to the soil pipe. Then drill some pilot holes into the floor at the fixing points. If it's a solid floor, you'll need to make the holes with a hammer-action drill and plug them.
Step 7
Push plastic protective inserts through the holes in the base of the pan, and insert the retaining screws through and into the floor. If the cistern has fixing holes in the back, attach it to the wall by drilling and plugging. Remember to add rubber washers before you tighten the nuts.
Step 8
Connect the supply pipe for the cold water feed, using a push-fit tap connector.
Step 9
Fit the hinge assembly to the seat, following the manufacturer's instructions.
Step 10
Connect the seat to the pan by securing through the holes at the back, using the screws supplied. Then adjust it to sit in the correct position.
It is crucial to make the walls of your bathroom waterproof, and bathroom wall panels or bathroom cladding is not only a great way to do that, but its also the easiest way to update the look of your bathroom. When it comes to adding wall panels to your bathroom, there are a large selection of designs to choose from which means you’ll always find something that’ll suit your space. So how do you have them installed? With this brief guide, you’ll learn everything you need to know about the bathroom panels installation. Let’s have a look!
Answer a few quick questions to help us match you with the right Bathroom Fitter
Receive no-obligation quotes from 4 Bathroom Fitters working in North West.
Compare prices, customer reviews and services, and hire the right Bathroom Fitter.
View our open Bathroom Fitter jobs near you
Join today