Paving & Driveway | Resin Bound
Glasgow - G67
Enquiry from: JOHN A
Start Date: Immediate
RESIN PATIO AND PATHS APP 25 SQ M
Over 87 reviews & an average rating of 4.7/5 stars, you'll find the right pro
Use the shortlist button to select up to 4 tradespeople, enter your project details and press send
Get up to 4 quotes from local Driveway Installers near you
Glasgow - G67
Enquiry from: JOHN A
Start Date: Immediate
RESIN PATIO AND PATHS APP 25 SQ M
Glasgow - G61
Enquiry from: Michael A
Start Date: Immediate
Parking has become so bad I am now looking to have the rockery removed in place of a driveway. I am looking for a quote for the estimated cost to remove the rockery and wall and replace with a tarmac ...
Glasgow - G44
Enquiry from: Michael O
Start Date: Immediate
looking to get my front steps resin bonded are you the property owner: owner of the property property type: semi detached do you require: resin patterned what work do you need to have done: other roug...
Glasgow - G12
Enquiry from: Ajit S
Start Date: Immediate
Owner Terraced Slab Paving Driveway 2-3 cars Supplied and laid 1-3 Months
Glasgow - G43
Enquiry from: Mirza M
Start Date: Immediate
Owner Semi detached Block Paving Driveway 2-3 cars Supplied and laid 1-3 Months
Glasgow - G42
Enquiry from: Altaf H
Start Date: Immediate
Owner Terraced Block Paving Driveway 2-3 cars Supplied and laid 1-3 Months
Glasgow - G53
Enquiry from: Peter R
Start Date: Immediate
I need my driveway tarred also my old bloc removed
Glasgow - G62
Enquiry from: Agnes O
Start Date: Immediate
Quote to lay tarmac driveway.
Glasgow - G42
Enquiry from: Saad Y
Start Date: Immediate
Owner Terraced Slab Paving. Other 2-3 cars Supplied and laid 1-3 Months
Glasgow - G13
Enquiry from: Jamie S
Start Date: Immediate
would like a quote for a driveway to replace old gravel drive with no sub-base,
Glasgow - G64
Enquiry from: Tommy C
Start Date: Immediate
mono block drive way and patio slabs pressure washed and weeded with treatmeant to stop weeds regrowing are you the property owner: owner property type: semi detached do you have a: small garden garde...
Glasgow - G53
Enquiry from: Angela D
Start Date: Immediate
i'm looking to remove lawn front the front garden. put down weed reducing membrane and lay chicken stones on top are you the property owner: tenant (with permission) property type: other do you have a...
Glasgow - G33
Enquiry from: William G
Start Date: Immediate
concrete imprinted driveway
Glasgow - G64
Enquiry from: Sardara S
Start Date: Immediate
owner semi detached pattern imprinted paving other 2-3 cars supplied and laid. 1-3 months are you the property owner: owner of the property property type: semi detached do you require: resin patterne...
Glasgow - G75
Enquiry from: Abby G
Start Date: Immediate
Driveway, tarmac, monoblock
Glasgow - G65
Enquiry from: George C
Start Date: Immediate
area at front monoblocked or slabb*** x 9ft. two coping stones e***. two steps resurfaced. are you the property owner: owner of the property property type: terrace roughly how big is the driveway area...
Glasgow - G52
Enquiry from: Mary M
Start Date: Immediate
homeowner driveway supplied and fitted please call to appoint
Glasgow - G52
Enquiry from: Mary M
Start Date: Immediate
homeowner driveway supplied and fitted please call to appoint
Glasgow - G75
Enquiry from: Stuart T
Start Date: Immediate
require additional driveway space next to existing monoblock driveway. presently grass. looking to construct with tarmac. are you the property owner: relative of owner property type: detached do you r...
Glasgow - G77
Enquiry from: Kashif A
Start Date: Immediate
approx 120 sqm block paving for my driveways are you the property owner: owner of the property property type: semi detached do you require: block paving location: front what work is required: driveway...
Are you planning to install a driveway on your home or property? If yes, then you’ll most likely be interested to know exactly how much it’s going to cost. Well, to get started you’ll have to decide whether you’ll be doing this yourself or perhaps you’d be hiring a specialist. The project could be much more effective if you decide to tackle it on your own as you’re only going to be worried about the paying for the materials without any labour costs. However, installing a driveway is not the simplest of tasks even for the competent and more experienced DIYers. Therefore, if you choose to carry out the project on your own, you should also get ready for a longer completion time than it would have been if you hired a professional which is usually around 48 hours. If you have all the tools and materials in place before commencement, then it’s possible to complete the project over the weekend. However, there are many risks involved such as the possibility of misjudging the proper quantity of concrete mixture (for a concrete driveway) and more. So, how much does driveway installer charge?
Well, just like other home improvement projects, the amount charged by driveway installers depend on a number of factors like the type of driveway (concrete, asphalt, tarmac etc), size of the area, the experience of the professional, the property’s location and lots more. However, in general, the average cost of a driveway ranges between £35 to £85 per square metre. For labour costs, you can expect to pay between £200 to £450 per day based on the work’s complexity.
The table shows the sorts of task that Driveway Installers typically do as well as the regular cost series of these projects. Some jobs take longer to finish than others so costs do be very different by project.
View our Driveway Installer cost guide View our Driveway Installer adviceDriveway Installer job | Driveway Installer cost in 2024 |
---|---|
Tarmac paving and driveways in Glasgow | £1,125-£1,725 |
Block paving in Glasgow | £3,000-£4,600 |
Slab Paving and Driveway in Glasgow | £1,875-£2,875 |
Driveway cleaning in Glasgow | £142-£282 |
Gravel paving and driveways in Glasgow | £3,000-£4,600 |
Pattern imprinted driveways in Glasgow | £3,750-£5,750 |
Resin bound driveway in Glasgow | £2,625-£4,025 |
Driveway repair in Glasgow | £1,520-£2,280 |
Indian Stone Paving in Glasgow | £2,000-£3,800 |
Pave Driveway in Glasgow | £1,800-£3,100 |
Do you want to know the level of thickness a driveway concrete slab should be? Well, you are not alone! So many other home owners ask this question on a regular basis and reasonably so. In order to prevent cracks on your concrete over time, it’s crucial to ensure an even thickness across your driveway concrete. To determine the necessary thickness of your driveway concrete, there are some questions that must be answered. These includes:
• What’s the number of vehicles you expect to have on your driveway?
• Do you plan on parking heavy, industrial vehicles on it?
For a standard passenger vehicle driveway, you’d have a driveway spanning 8 to 9 feet in width as well as 15 to 18 feet for double width. The thickness for this type of driveway concrete is usually 4 inches of non-reinforced pavement. Ultimately, this enables you to park everyday family cars on it without having to worry about it cracking due to the car’s weight. Also in order to prevent cracks, it’s expected that the driveway should be sloped towards the street as this would make sure that there’s a run off of water especially for areas that experience lots of flooding. In addition, there’s also the need to install joints to prevent cracking. For the standard 4 inch thick driveway, these joints should be positioned about 10 feet apart.
Finally for parking heavy industrial vehicles, your concrete driveway is expected to be thicker in order to cope with the added weight. Typically, the concrete driveway will require a thickness of about 5 inches. The additional one inch may not sound much, but the fact is this can increase the load carrying capacity of the concrete driveway by up to 50 percent.
Are you worried there’s a slope on the area where your block paving is to be installed? Good news is, it’s very possible to lay block paving on a slope. However, this can be a very difficult task which should be done by a reliable professional ( especially if you lack proper training and experience) who can guarantee the best results, the first time and also help save you money from possible costly mistakes. This guide will provide you with everything you need about the slope block paving installation process. Let’s have a look!
• Demarcate The Walkway
To get started, you have to determine how and where you want your walkway to be while also determining the thickness of the paver. Ensure to choose the less sloppy area and utilize landscape paint to mark the area visibly.
• Prepare The Ground
Clear out all forms of dirts, roots, rocks and other debris on the soil. Once done, proceed to cutting the sods to the required length and put them somewhere close.
• Make Boundaries
There’s a need for landscape borders. Here, it’ll be easier to use plastics as boundaries for your lawn’s edges. Install them on the sides that have already been cut
• Apply A Level Of Gravel
Obtain the correct size of gravel and spread them evenly over the area to ensure a firm foundation for the pavers is formed. Makes sure that the rocks is at a minimum of 2 inches deep into the soil.
• Install The Block Pavers
Start from the centremost position of the pathway and work towards the sides until you’re able to cover every inch of the area.
• Apply A Layer Of Cement
Apply cement over the pavers and utilize a broom to sweep it and fill up all the gaps and spaces between the pavers. Then, press the pathway to be levelled using a compactor.
Weeds growing on your gravel can look unsightly, so it’s worth taking steps to stop them sprouting up.
When you lay your driveway, make sure you use a weed proof membrane. This will help to stop most growth, although it won’t totally prevent weeds occurring. For any other growth, dig the weed out or use a weed killer.
No, pattern imprinted concrete shouldn’t be slippery. Most good driveway installers will add a special anti-slip agent to the sealant before they brush it onto your driveway, so it will stop it from being slippery.
It’s important to ask a driveway company how they will seal your driveway when you get a quote from them. If an untrustworthy company seals your driveway badly, it can cause a thick and extremely slippery surface, so it’s vital that you ask any contractor what their procedure is before you engage them.
It’s also important to remember that pattern imprinted concrete isn’t a ‘non-slip’ surface – it’s just not slippery. You could still slip over on a concrete driveway, just like you could on tarmac or a block paved driveway. Also, once you’ve walked and driven over your driveway for a few months, its skid and slip resistance will increase as it weathers and builds up tiny specs of dirt on it. Pattern imprinted concrete is often used in high footfall areas in places like shops, fast food restaurants and theme parks, so if there was a significant slip risk these businesses wouldn’t use it.
You might think that you could ask your contractor not to seal the driveway to make it less slippery, but it could actually do the opposite. By sealing pattern imprinted concrete, it means that moss and algae is much less likely to grow, which can be extremely slippery to walk on if it’s left to its own devices. If moss does form on your driveway, the sealed surface is much easier to clean as you can simply pressure wash it away; this is not as easy to do on a non-sealed surface.
How To Repair Sunken Concrete Driveway
If you have concrete driveway that’s cracked, uneven and mostly especially sunken, you’d know how distasteful it can be just viewing it on your property. A sunken concrete driveway is most likely caused by rainwater erosion removing the soil under it or a big root under it which as rotted over time. Another possible cause of the sunken concrete is an improperly prepared base which implies that the soil beneath wasn’t fully compact when the concrete was poured on it. Later on the soil beneath will eventually settle and shift below the concrete driveway which weakens the integrity of the entire driveway, making it more vulnerable to cracks, unevenness and sunken.
Two ways in which you can fix this problem includes either demolishing the whole driveway, re-compact the soil underneath and fill with new concrete or repair the entire driveway using an easy process called slabjacking. In this article, we’re going to look at the slabjacking repair process as it’s significantly less expensive than the demolishing approach and will also cause minimal disruption to your lifestyle.
Also referred to as mudjacking or concrete lifting, slabjacking is simply a process used to float your existing concrete back to its original position. If you are not a competent DIYer or lack confidence to pull this off, we’d recommend reach out to a professional for help. If otherwise, then you can practice the slabjacking process given below.
✓ Drill holes through the slab.
✓ Pump grout mixture through the holes. This mixture will spread out beneath he driveway and raise it up.
✓ Lastly, fill the holes and level the concrete driveway surface.in such a way to hide the signs of the repair made.
This is a process that works to efficiently get your driveway back in a top condition relatively quickly.
Answer a few quick questions to help us match you with the right Driveway Installer
Receive no-obligation quotes from 4 Driveway Installers working in Glasgow.
Compare prices, customer reviews and services, and hire the right Driveway Installer.
View our open Driveway Installer jobs near you
Join today