- Prepare the sub-base The driveway company will excavate, or dig, the existing surface down to a depth of around 200mm. They will remove any debris from the area may place it in a skip or arrange for it to be removed in another way. When they dig down to the sub-base of your previous driveway, they will assess how much hardcore they need and arrange for that to be delivered to the site. They will then spread the hardcore across the sub-base to create a level surface to pour the concrete on. Most good contractors will apply a gel to any walls and doors to protect them from concrete splashes. They will also add any gulley tops, manhole covers or shuttering that’s required.
- Installation and imprinting Next, the tradespeople will have the concrete either poured from a large mixer vehicle or barrow it in from a mixer and pour onto the surface. They level it with rakes, then add a colour surface hardener in a colour of your choice. This will give the driveway its permanent colour. They will then wait until the concrete has hardened to the correct consistency for imprinting the pattern, then will use special tools and stencils to make the pattern that you asked for. They will then spread a colour powder called a release agent over the surface, and leave to dry for 1 to 2 days depending on the weather conditions.
- Cleaning When the contractors return, they will add crack control cuts into the concrete. This is important because concrete expands and contracts in the heat, so there needs to be some give to stop any larger cracks from forming. Then everything is power washed clean, and a chemical wash is also used on the concrete to ensure it’s completely dust-free. The installers will ensure all your walls and doors are clean, which will hopefully be an easy job if they used wall gel.
- Sealing The final step is to seal the driveway. There needs to have been at least two dry days before the tradespeople can do it, so you might find it’s best to have your pattern imprinted driveway installed in the summer. The contractors will blow any debris away from the surface and dry any damp areas where necessary. They will then add an anti-slip agent to the sealant and brush it on. It’s best to not walk or drive onto your new concrete driveway for about 4 days after sealing to allow everything to set. But after that, you’re ready to use your new driveway!
Find a Driveway Installer you can trust near you.
Choose from 2822 Driveway Installers, all rated by people like you.
Over 3103 reviews & an average rating of 4.4/5 stars, you'll find the right pro
Enter your location to refine your search
Choose and shortlist
Use the shortlist button to select up to 4 tradespeople, enter your project details and press send
Keen to get on with the job?
Get up to 4 quotes from local Driveway Installers near you
Dartman
C R Smith and SON
Home Services
JM Fencing and Landscaping
First Choice
Home Improvements From TOP TO Bottom
Find a local Driveway Installer you can trust...
How much do Driveway Installer services cost?
Are you planning to install a driveway on your home or property? If yes, then you’ll most likely be interested to know exactly how much it’s going to cost. Well, to get started you’ll have to decide whether you’ll be doing this yourself or perhaps you’d be hiring a specialist. The project could be much more effective if you decide to tackle it on your own as you’re only going to be worried about the paying for the materials without any labour costs. However, installing a driveway is not the simplest of tasks even for the competent and more experienced DIYers. Therefore, if you choose to carry out the project on your own, you should also get ready for a longer completion time than it would have been if you hired a professional which is usually around 48 hours. If you have all the tools and materials in place before commencement, then it’s possible to complete the project over the weekend. However, there are many risks involved such as the possibility of misjudging the proper quantity of concrete mixture (for a concrete driveway) and more. So, how much does driveway installer charge?
Well, just like other home improvement projects, the amount charged by driveway installers depend on a number of factors like the type of driveway (concrete, asphalt, tarmac etc), size of the area, the experience of the professional, the property’s location and lots more. However, in general, the average cost of a driveway ranges between £35 to £85 per square metre. For labour costs, you can expect to pay between £200 to £450 per day based on the work’s complexity.
The table shows the sorts of task that Driveway Installers typically do as well as the regular cost series of these projects. Some jobs take longer to finish than others so costs do be very different by project.
View our Driveway Installer cost guide View our Driveway Installer adviceThe average price
of a Driveway Installer is:
£6,644
Driveway Installer job | Driveway Installer cost in 2024 |
---|---|
Tarmac paving and driveways | £1,136-£19,274 |
Block paving | £1,171-£18,169 |
Slab Paving and Driveway | £929-£15,706 |
Driveway cleaning | £174-£8,254 |
Gravel paving and driveways | £912-£11,008 |
Pattern imprinted driveways | £1,661-£17,689 |
Resin bound driveway | £1,433-£13,612 |
Driveway repair | £280-£7,412 |
Indian Stone Paving | £938-£15,773 |
Pave Driveway | £923-£15,723 |
Driveway Installer service qualifications and accreditations
Driveway Installers qualifications and accreditation's: Gaining the best training and also being taught exactly how to do your profession is key for any type of tradesperson including Driveway Installer s. View the online profile of each Driveway Installer you are looking at to see what qualification they hold and also what trade associations they are a member of. Some trade associations that Driveway Installers may be a member of include: BICSc, Federation of Master Builders, The Consumer Protection Guarantee. Equally Driveway Installers might even have the following accreditations: Chartered Institute of Building, Marshalls Accredited Installer, Brett Approved Installer Scheme Insurance for Driveway Installers: Anyone that works on your home, including Driveway Installers, really should have valid public liability insurance, which safeguards you the house owner and likewise the Driveway Installer should unfortunately anything go wrong while they are doing the work. Planning permission for Driveway Installers A lot of the jobs that a Driveway Installer will certainly do for you won't require planning permission unless its a listed property. Always discuss with the Driveway Installer if planning permission would be needed for the task you are doing, they can advise the actions that need to be taken.
Services offered by Driveway Installer
What services do Driveway Installers typically supply? There are a number of jobs you could certainly employ a Driveway Installer for, and some of the most typical projects that Driveway Installer are asked to accomplish provide:
Driveway Installer FAQs
Gravel, asphalt, concrete and paving can all be permeable. However, some types of asphalt and concrete are impermeable. This is why it’s important to be precise about what material you want for your driveway. If you want a permeable driveway, you should also make sure that your sub-base is also permeable.
While many professionals will recommend a pressure washer to clean block paving, it’s possible to clean your paving without one – just scrub the affected areas with a firm bristled brush and use plenty of soap. Then, rinse off the area with clean water.
As a homeowner, your home is your haven where you can control things and add more value, however that doesn’t give you the license to go around digging up your driveway as you deem fit. Replacing your old driveway with a new one comes with its own unique set of rules which are put in place to ensure that your personal preferences doesn’t pose long term issues such as flooding or poor visibility on any adjoining road. You should however note that it’s not every time you would need a planing permission for your driveway.
Below are the circumstances whereby you’ll need to submit an application before commencing your driveway paving project.
• In the event whereby you are to pave a driveway of over 5 square metres and/or a permeable surface is not available for its drainage. If the later is not available, there’ll be an increase in the flood risk. As a result, there’s the need to take into account permeable paving for your project.
• In the event whereby you’re changing the visibility on your road. These situations include removal of trees, gates or walls and the like. So far your changes negatively affects drivers’ visibility, you’ll need a planning permission.
• In the situations whereby you need to include a drop kerb. You may plan to add in a drop kerb if you’re thinking about expanding your driveway. Therefore, since residents can’t change the roads or pavements at their first fanciful impulse you’ll need to consult your local council before submitting your application.
• In the situation whereby its a listed building. Planning decisions are also greatly affected by the need to protect historic building. So if your building is a listed one, you’d have to submit an application before making changes.
- Where in the country you live
- What colour you choose
- What pattern you choose
- Whether you choose a standard or a higher-quality concrete
Driveway work is usually done in the warmer half of the year. This is partly to avoid bad weather. If you want to get ahead and avoid waiting for a contractor to be free, you should try getting in touch with a professional in the early spring so a date can be booked for install as soon as practically possible.
Is Block Paving Permeable?
Back in 2008, there was a regulation introduced which comes with a requirement guiding the pavement of front gardens. It requires homeowners to incorporate the conventional impermeable driveways which makes for an uncontrolled run off of rainwater into sewers, roadways, local watercourses etc. However since then, new systems have been established which complies with the legislation and permit driveway laying of block paving without requiring planning permission while still providing the same visually appealing features as the conventional systems. Therefore, a short and simple answer to whether block paving is permeable is yes.
A permeable paving driveway (unlike the conventional ones which quickly diverts rainwater towards the edges to local drains) purposefully diverts rainwater into the built paving structure which oversees a controlled release of the rainwater into the environment. Permeable block paving comes with a wide range of benefits which includes the following:
• No Planning Permission Required
Unlike the traditional system, permeable block paving requires no planning permission as it oversees the driveway draining by ensuring that the surface water passes directly through the joints which makes sure the drains are not over worked and minimizing the risk of flood.
• Puddles Reduction By Natural Drainage
A permeable block paving minimizes puddles as well as standing water which helps to boost natural drainage. This is due to the laying process which features little voids that permits the passage of water.
• Natural Filtration
A natural filtration occurs when water is allowed to return to the ground by permeable block paving which helps assists in getting rid of any pollutants from the rain water.
• Flood Prevention
Permeable paving can help to prevent flooding as it absorbs water rather than directing it to the local drains or leaving it to build up on the surface’s top.
• Natural & Sustainable Materials
Natural and recyclable materials can be incorporated in producing permeable paving which is an excellent choice especially if you’re seeking a more sustainable driveway.
Is there a hole in your asphalt driveway you feel you can repair yourself? If it’s something you know you can confidently do then this step by step guide is just for you. If otherwise, then we’d recommend you hire the services of a reliable professional who can guarantee the best results while also saving you some time and extra money that could result from possible errors. In this article, we’d go over the reparation process of an asphalt driveway with a hole in it.
✓ Get the necessary tools. You’re going to need a broom ( to clean the area), caulking gun ( to fill the hole), a hand tamp a plate compactor or a hammer ( to level the filled in hole) and a weeding glove (just in case there are weeds growing in the hole).
✓ Prepare the area. Do this by weeding the plants or weeds that might have grown inside the hole and identify your asphalt filler.
✓ Wet your soil, if necessary. It’s important to note that this is only necessary if your soil is dry to help the filler stick properly.
✓ Fill in deep holes. If the hole goes down about 3 to 4 inches or more, simply fill it with any material like rocks, clay etc.
✓ Apply the asphalt filler. Fill the hole with the asphalt filler to about half an inch higher than the surface of the driveway.
✓ Level the filler. For a large hole, make use of a plate compactor or a hand stamp, but a hammer will be sufficient for smaller holes.
✓ Cover the hole, if necessary. If your home isn’t level, covering your hole with a piece of plywood is advisable.
✓ Clean off the seal. After the asphalt looks done and in place, simply brush away the debris from the seal to finish off the project.
Driveway Installer help and advice
How it works
Tell us about your Driveway Installer project
Answer a few quick questions to help us match you with the right Driveway Installer
Get up to 4 free quotes
Receive no-obligation quotes from 4 Driveway Installers working in your area.
Pick the right pro for you
Compare prices, customer reviews and services, and hire the right Driveway Installer.
Are you a Driveway Installer?
View our open Driveway Installer jobs near you
Join todayRecent Driveway Installer Enquiries
Paving & Driveway | Block
London - NW4
Enquiry from: Rosetta O
Start Date: Immediate
A QUOTE FOR OUR DRIVEWAY PAVING
Paving & Driveway | Block
Holmfirth - HD9
Enquiry from: Nick R
Start Date: Immediate
A quote for blocked driveway.
Paving & Driveway | Gravel
Swindon - SN3
Enquiry from: CLIVE M
Start Date: Immediate
CURRENT GRAVEL DRIVEWAY WITH ZERO SUBSTRATE TO BE REPLACED 6.5M X 7.0M AREA
Paving & Driveway | Resin Bound
Macclesfield - SK11
Enquiry from: Raymond B
Start Date: Immediate
Would like a free quote for doing my driveway.
Driveway Repair
Hailsham - BN27
Enquiry from: Norah K
Start Date: Immediate
I have a large tarmac drive which is broken and coming up along one side
Paving & Driveway | Block
Shrewsbury - SY5
Enquiry from: Lindsey W
Start Date: Immediate
Put in extra car parking space, dropped kerb and resurface front drive.
Paving & Driveway | Pattern Imprinted
Liverpool - L31
Enquiry from: Afshan M
Start Date: Immediate
I want to make imprint driveway
Paving & Driveway | Asphalt / Tarmac
Rhyl - LL18
Enquiry from: Peter W
Start Date: Immediate
Currently a block laid driveway but want it tarmac with brick edging. 50sqm total area. Rough price to complete? Thanks.
Driveway Repair
Peterhead - AB42
Enquiry from: Patrick B
Start Date: Immediate
Concrete driveway repair
Driveway Repair
Whitstable - CT5
Enquiry from: Jayne F
Start Date: Immediate
Repair to one driveway and extension to make it a double. The drop kerb is already in place
Paving & Driveway | Asphalt / Tarmac
Deeside - CH5
Enquiry from: Cindy J
Start Date: Immediate
Front and back of house tarmac
Paving & Driveway | Asphalt / Tarmac
Glossop - SK13
Enquiry from: Joanne W
Start Date: Immediate
Hiya, I'm just gathering some quotes for our driveway to be tarmacced please can you send someone around to give advice and a price? Thanks
Paving & Driveway | Block
Faversham - ME13
Enquiry from: Simon B
Start Date: Immediate
hi there, we're in the process of buying this property in faversham and need to get an idea of how muyc it would be to excavate half the front garden and convert into a driveway plus re-do the drivewa...
Cleaning | Driveway / Decking
Helston - TR13
Enquiry from: Mark A
Start Date: Immediate
Patio and driveway clean.
Paving & Driveway | Asphalt / Tarmac
Edgware - HA8
Enquiry from: Jayesh P
Start Date: Immediate
i am not too worried about aesthetics. i need a cheap but sturdy driveway for parking 2-3 cars. are you the property owner: relative of owner property type: semi detached do you require: asphalt/tarm...
Paving & Driveway | Asphalt / Tarmac
Carlisle - CA1
Enquiry from: Megan G
Start Date: Immediate
Front changed to a double drive. Would like it tarmac
Paving & Driveway | Pattern Imprinted
Benfleet - SS7
Enquiry from: Louie B
Start Date: Immediate
i would like the drive to be dug up and have a pattern imprinted for a finish. i would also need the steps to the front door redoing Thanks
Paving & Driveway | Block
Birmingham - B42
Enquiry from: Jean B
Start Date: Immediate
homeowner block paving supplied and fitted please call to appoint
Paving & Driveway | Asphalt / Tarmac
Harrogate - HG1
Enquiry from: Sophie P
Start Date: Immediate
customer made an enquiry for tarmac paving & driveway and confirmed on the quotatis site they would like quotes from a driveway installer.customer lives in the harrogate area and would like a call to ...
Paving & Driveway | Asphalt / Tarmac
Airdrie - ML6
Enquiry from: Thais R
Start Date: Immediate
hello, my garden it's about 5m x 3m. we would like to remove the grass and replace it with slabs. please. are you the property owner: owner of the property property type: detached roughly the size of ...
Driveway Installer in your region
- Driveway Installer Scotland
- Driveway Installer Northern Ireland
- Driveway Installer North East
- Driveway Installer North West
- Driveway Installer East Midlands
- Driveway Installer West Midlands
- Driveway Installer Wales
- Driveway Installer South West
- Driveway Installer South East
- Driveway Installer Greater London
- Driveway Installer Isle of Man
- Driveway Installer Channel Islands
- Driveway Installer Yorkshire & Humberside
- Driveway Installer East Anglia